Modifing for precission injectors question

Reply Subscribe

Thread Tools

Apr 5, 2005 | 07:20 AM

#1 (permalink)

Preludesitdriver

Thread Starter

Registered User

Joined: Apr 2003

Posts: 92

Likes: 0

Modifing for precission injectors question

I am going to the bigger injector side. I was wondering if what mods do i need to run the 1000cc pression injectors. thanks

__________________
Bring it!!!

You see that!? yeah me either

Apr 5, 2005 | 07:43 AM

#2 (permalink)

Punkinterviews

Chavez Motorsports

Joined: Aug 2003

Posts: 6,385

Likes: 0

Get a car that needs injectors that big would be a good start!

__________________
Chavez Motorsports

The reason CMS fabrication is closed!! Click me!

11.965 @ 114 Supercharged Teg...RIP

Apr 5, 2005 | 07:43 AM

#3 (permalink)

Alpha

Registered User

Joined: Jul 2002

Posts: 9,270

Likes: 0

Does your power level warrant 1,000cc fuel injectors? If you are not making 500+ wheel horsepower you don't need 1,000cc fuel injectors. Precision injectors are machined to fit our fuel rails.

__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site

* RIP Kevin/Slo_Si RIP & Pablo/Fathead

Apr 5, 2005 | 07:48 AM

#4 (permalink)

Preludesitdriver

Thread Starter

Registered User

Joined: Apr 2003

Posts: 92

Likes: 0

yes i have a fully built motorand i am looking to get it tuned at high boost. like 15 -18 lbs. I am aiming at the 450 500 whp range. The reson i ask about the injectors is because I heard you have to modify something on them to fit the honda setup. I havethe h22a

__________________
Bring it!!!

You see that!? yeah me either

Apr 5, 2005 | 09:54 AM

#5 (permalink)

InsaneCivicCoupe

Retired Ricer...

Joined: Jan 2003

Posts: 11,813

Likes: 0

I seriously doubt you will make 450-500whp on only 15-18psi of boost, unless you are running some big nasty turbo... What turbo do you have???

__________________

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720

InductionPerformance.com

NS Racing (813)842-5517

Apr 5, 2005 | 09:58 AM

#6 (permalink)

Preludesitdriver

Thread Starter

Registered User

Joined: Apr 2003

Posts: 92

Likes: 0

i am running a t3/to4e turbonetics turbo, apexi avcr, waiting on some info on injectors, also have a 2.5 into 3" exhuast straight, msd sci, wires and coil. alot more stuff. just dont want to list all

__________________
Bring it!!!

You see that!? yeah me either

Apr 5, 2005 | 10:15 AM

#7 (permalink)

Cronic

Guest

Posts: n/a

I have to agree with Chris. With a t3/t4 you won't be making enough horsepower to warrant those injectors. If you already have them, go for it.

Apr 5, 2005 | 10:43 AM

#8 (permalink)

MacGruber

MaDe Of MoNeY

Joined: Jan 2004

Posts: 1,834

Likes: 0

Who's doing the sleave work?

-Mike

__________________

Quote:

Originally Posted by Z28ricer

"What shitty poorly fitted aero did you ziptie on today, after installing shitty knockoff parts that dont fit worth a damn, followed up by poorly fitted cheap heavy wheels with the wrong offset so they rub but you play it off as looking cool, and then post pics here today"

Apr 5, 2005 | 11:07 AM

#9 (permalink)

InsaneCivicCoupe

Retired Ricer...

Joined: Jan 2003

Posts: 11,813

Likes: 0

That turbo may be good for 450whp (depending on compressor wheel) but I guarantee it will take a LOT more than 15-18psi...

When you say fully built motor, what do you mean??? sleeves, rods, pistons, cams, valvetrain, port work, etc.......

Give us some more insight here...

__________________

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720

InductionPerformance.com

NS Racing (813)842-5517