project FI killer part 2
Thread Starter
Powered by BOOST
Joined: Apr 2002
Posts: 1,379
Likes: 0
put the car on the dyno today. not the best conditions for dynoing but you take what you can get. was raining off and on w/ temps in the 90+ deg . the dyno we were using is setup for rear wheel drive cars so they built a an enclosure at the end for sound dampening. there was very little space and temp ran very high around the front of the car. IAT was as high as 125 deg a times. with only 2 hours this is what we ended with. with more time to work on top end and better conditions im sure we could of found more power.
thanks 60-1EK
thanks 60-1EK
__________________
K series on crack
Street Car on 25PSI V V V V V V
http://www.youtube.com/watch?v=_sn1WsbI0UQ
S D M
K series on crack
Street Car on 25PSI V V V V V V
http://www.youtube.com/watch?v=_sn1WsbI0UQ
S D M
I'm aLL mOtOr I sWaRe ;)
Joined: Jan 2003
Posts: 4,155
Likes: 0
Originally Posted by na200whp
put the car on the dyno today. not the best conditions for dynoing but you take what you can get. was raining off and on w/ temps in the 90+ deg . the dyno we were using is setup for rear wheel drive cars so they built a an enclosure at the end for sound dampening. there was very little space and temp ran very high around the front of the car. IAT was as high as 125 deg a times. with only 2 hours this is what we ended with. with more time to work on top end and better conditions im sure we could of found more power.
thanks 60-1EK
thanks 60-1EK
props man.... super props....
__________________
RIP Kevin "Slo_Si" You'll be missed by everyone who knew you my nigga.... I'll see you soon man...
RIP Kevin "Slo_Si" You'll be missed by everyone who knew you my nigga.... I'll see you soon man...
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
Congrats steve
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
i stepped on my weiner!
Joined: Oct 2002
Posts: 2,994
Likes: 0
this should have been a new thread steve!
congrats!
stop hoggin my tuner!
congrats!
stop hoggin my tuner!
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
Spent more money than you
Joined: Oct 2003
Posts: 7,708
Likes: 0
I wanna be like you when I grow up.
__________________
Racing Integration
LHT Performance
My tuner is named Alpha
Roque Fab = The best Fabricator in the WHOLE WORLD
Racing Integration
LHT Performance
My tuner is named Alpha
Roque Fab = The best Fabricator in the WHOLE WORLD
The best engine in the world is the vagina, it takes any size piston, its self lubricating, starts with 1 finger, and every 4 weeks does its own oil change. It's just a pity the management system is so fucking temperamental.
Thread Starter
Powered by BOOST
Joined: Apr 2002
Posts: 1,379
Likes: 0
thanks guys, want to see something funny ??? this is my dyno overlayed w/ jasons car . and this was not a full pull for him.
__________________
K series on crack
Street Car on 25PSI V V V V V V
http://www.youtube.com/watch?v=_sn1WsbI0UQ
S D M
K series on crack
Street Car on 25PSI V V V V V V
http://www.youtube.com/watch?v=_sn1WsbI0UQ
S D M
Last edited by na200whp; Jul 3, 2005 at 01:25 PM.
