Project: F/i Killer
Thread Starter
Powered by BOOST
Joined: Apr 2002
Posts: 1,379
Likes: 0
some info--
block was done by golden eagle. 1/2inch deck plate
(they do not weild on there plates instead they use some kinda compound between the block and plate and bolt them together.)
bore is 84.5mm with weisco/endyn pistons
crank eagle 95mm stroker crank with eagle 5.967" rods
the displacement of this block will be around 2.13 liter
i am currently have the w/p block off plate w/ electric pump but may go back to an oem pump before it makes it to the car.
block was done by golden eagle. 1/2inch deck plate
(they do not weild on there plates instead they use some kinda compound between the block and plate and bolt them together.)
bore is 84.5mm with weisco/endyn pistons
crank eagle 95mm stroker crank with eagle 5.967" rods
the displacement of this block will be around 2.13 liter
i am currently have the w/p block off plate w/ electric pump but may go back to an oem pump before it makes it to the car.
__________________
K series on crack
Street Car on 25PSI V V V V V V
http://www.youtube.com/watch?v=_sn1WsbI0UQ
S D M
K series on crack
Street Car on 25PSI V V V V V V
http://www.youtube.com/watch?v=_sn1WsbI0UQ
S D M
Spent more money than you
Joined: Oct 2003
Posts: 7,708
Likes: 0
nice.
__________________
Racing Integration
LHT Performance
My tuner is named Alpha
Roque Fab = The best Fabricator in the WHOLE WORLD
Racing Integration
LHT Performance
My tuner is named Alpha
Roque Fab = The best Fabricator in the WHOLE WORLD
The best engine in the world is the vagina, it takes any size piston, its self lubricating, starts with 1 finger, and every 4 weeks does its own oil change. It's just a pity the management system is so fucking temperamental.
Can you spot me 20 cars?
Joined: Aug 2003
Posts: 4,464
Likes: 0
Originally Posted by na200whp
some info--
block was done by golden eagle. 1/2inch deck plate
(they do not weild on there plates instead they use some kinda compound between the block and plate and bolt them together.)
bore is 84.5mm with weisco/endyn pistons
crank eagle 95mm stroker crank with eagle 5.967" rods
the displacement of this block will be around 2.13 liter
i am currently have the w/p block off plate w/ electric pump but may go back to an oem pump before it makes it to the car.
block was done by golden eagle. 1/2inch deck plate
(they do not weild on there plates instead they use some kinda compound between the block and plate and bolt them together.)
bore is 84.5mm with weisco/endyn pistons
crank eagle 95mm stroker crank with eagle 5.967" rods
the displacement of this block will be around 2.13 liter
i am currently have the w/p block off plate w/ electric pump but may go back to an oem pump before it makes it to the car.
Good luck with the rest of the build. 
grippin grain
Joined: Jan 2003
Posts: 3,604
Likes: 0
Nice......N/A is best bitches....That is some dome on those pistons....Mine are 12.5:1 and yours look way taller. This motor is goin into an eg? What head and cams will you be using?
__________________
Obsession is a word used by the lazy to describe the dedicated.
GO GATORS
Obsession is a word used by the lazy to describe the dedicated.
GO GATORS
i stepped on my weiner!
Joined: Oct 2002
Posts: 2,994
Likes: 0
NA200whp is like the poster child for NA motors!
if its NA hes all over it, his head is top notch and as far as cams, i think hes dyno'd everything on the market to find the right combo of parts, trust me it will be worth seeing the dyno sheet after hes done!
if its NA hes all over it, his head is top notch and as far as cams, i think hes dyno'd everything on the market to find the right combo of parts, trust me it will be worth seeing the dyno sheet after hes done!
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
Retired Street Racer
Joined: Mar 2003
Posts: 1,372
Likes: 0
You are the man, what cams you using?? ITBs??? might want to change your name to na240whp!!!
Also, what tranny you using?? is this still going to be street driven???
Also, what tranny you using?? is this still going to be street driven???
__________________
My Old Honda
My Old Honda
Can you spot me 20 cars?
Joined: Aug 2003
Posts: 4,464
Likes: 0
Originally Posted by juiced2ndgenteg
nice deck plate. thats the first I've seen being used on TR. much props to you.
Can you spot me 20 cars?
Joined: Aug 2003
Posts: 4,464
Likes: 0
Originally Posted by na200whp
some info--
block was done by golden eagle. 1/2inch deck plate
(they do not weild on there plates instead they use some kinda compound between the block and plate and bolt them together.)
bore is 84.5mm with weisco/endyn pistons
crank eagle 95mm stroker crank with eagle 5.967" rods
the displacement of this block will be around 2.13 liter
i am currently have the w/p block off plate w/ electric pump but may go back to an oem pump before it makes it to the car.
block was done by golden eagle. 1/2inch deck plate
(they do not weild on there plates instead they use some kinda compound between the block and plate and bolt them together.)
bore is 84.5mm with weisco/endyn pistons
crank eagle 95mm stroker crank with eagle 5.967" rods
the displacement of this block will be around 2.13 liter
i am currently have the w/p block off plate w/ electric pump but may go back to an oem pump before it makes it to the car.
Chavez Motorsports
Joined: Aug 2003
Posts: 6,385
Likes: 0
Originally Posted by qitstrn
BTW is this going to run on pumpgas?
__________________
Chavez Motorsports
The reason CMS fabrication is closed!! Click me!
11.965 @ 114 Supercharged Teg...RIP
Chavez Motorsports
The reason CMS fabrication is closed!! Click me!
11.965 @ 114 Supercharged Teg...RIP
