installed vafc...car now runs like $&*#
Thread Starter
ROTM March 2013
Joined: Jul 2003
Posts: 2,104
Likes: 0
installed vafc...car now runs like $&*#
just installed a VAFC and set up the initial settings step by step and started up my car and it runs like shit.
rechecked wiring and the car only runs bad when the vtec sol. wire and the pressure signal wire are connected.
I left all the "monitoring" wires connected and disconnected the VTEC SOL. , VTM, PRESS. SIGNAL and reconnected the stock ecu wires and the car runs fine again...
i dont get it...
and i know its connected right because the pressure signal, throttle signal, rpm,and voltage signal read out in monitor mode
rechecked wiring and the car only runs bad when the vtec sol. wire and the pressure signal wire are connected.
I left all the "monitoring" wires connected and disconnected the VTEC SOL. , VTM, PRESS. SIGNAL and reconnected the stock ecu wires and the car runs fine again...
i dont get it...
and i know its connected right because the pressure signal, throttle signal, rpm,and voltage signal read out in monitor mode
Last edited by CARNAG3; Sep 23, 2004 at 05:04 PM.
Traction Problems
Joined: Jul 2003
Posts: 662
Likes: 0
Cool Runnings
Joined: Dec 2002
Posts: 4,394
Likes: 0
contact kj he could help you with that.
__________________
Paintball marker and equipment for sale below
http://www.tampaforums.com/forums/sp...extras-344168/
She can pop it she can lock it ........ I'M IN LOVE WITH A HONDA
R.I.P. DELROY MANDERSON SR. 1-30-73 ~ 9-19-02
THE FEW
THE STRONG
THE BRAVE
NATURALLY ASPIRATED
TR "OLD SKOOL EF MEMBER" #05
Paintball marker and equipment for sale below
http://www.tampaforums.com/forums/sp...extras-344168/
She can pop it she can lock it ........ I'M IN LOVE WITH A HONDA
R.I.P. DELROY MANDERSON SR. 1-30-73 ~ 9-19-02
THE FEW
THE STRONG
THE BRAVE
NATURALLY ASPIRATED
TR "OLD SKOOL EF MEMBER" #05
Traction Problems
Joined: Jul 2003
Posts: 662
Likes: 0
i stepped on my weiner!
Joined: Oct 2002
Posts: 2,994
Likes: 0
what pessure do you have it set at 760, or is it set for boost??
also do you have the right throttle setting and sensor type????
all these make a difference
also do you have the right throttle setting and sensor type????
all these make a difference
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
Thread Starter
ROTM March 2013
Joined: Jul 2003
Posts: 2,104
Likes: 0
gonna recheck all wiring today. the sensor type is at IN 06 OUT 06 . throttle is at diagnal up right arrow ( / ) .. vtec type is set at 1
if you hook up the vafc and and perform the intial set up but leave ALL other settings at default, the motor should run almost normal right?
would really help if someone could help me set it up as the book isnt very helpful describing what things are and what they should be set at
if you hook up the vafc and and perform the intial set up but leave ALL other settings at default, the motor should run almost normal right?
would really help if someone could help me set it up as the book isnt very helpful describing what things are and what they should be set at
