mustang 70MM throttle body?
Thread Starter
S1's MUSCLE RELAXER
Joined: Dec 2002
Posts: 3,844
Likes: 0
mustang 70MM throttle body?
ive heard that this is a direct bolt on to a b series intake manifold. is the tps the same as well? if so what year mostangs can i get it from?
__________________
tamparacing.com
tamparacing.com
Chavez Motorsports
Joined: Aug 2003
Posts: 6,385
Likes: 0
It needs a little fabrication with it. It's not a direct bolt on. They do sell a custom plate you can use. The mustang TB and plate are ALOT cheaper than using the Honda one!
Kris
Kris
__________________
Chavez Motorsports
The reason CMS fabrication is closed!! Click me!
11.965 @ 114 Supercharged Teg...RIP
Chavez Motorsports
The reason CMS fabrication is closed!! Click me!
11.965 @ 114 Supercharged Teg...RIP
Guest
Posts: n/a
Interesting, I'd never heard of this before.
It's a neet thing to add, with a tapered backplate. I'd like to see if you would gain any hp with this before the head swap. Afterwards, I would imagine you'd gain a couple ponies mid-top powerband.
It's a neet thing to add, with a tapered backplate. I'd like to see if you would gain any hp with this before the head swap. Afterwards, I would imagine you'd gain a couple ponies mid-top powerband.
Can you spot me 20 cars?
Joined: Aug 2003
Posts: 4,464
Likes: 0
Cory did that 2 years ago. It did work but nothing impressive. No point in having a TB bigger then your intake manifold. I know the JG is ported for a 65mm TB. Anything bigger is not worth it. I have a bone stock GSR TB on my car. I took off the 65 JG because of problems with TPS over a year ago and no difference. Granted this is a turbo application but 70mm is a waste. Try nitrous that will make power cheaply.
Chavez Motorsports
Joined: Aug 2003
Posts: 6,385
Likes: 0
Originally posted by Mars_302
Indeed, unless you are making some serious power you will never need a 70mm. That is kinda big even for a mustang.
Indeed, unless you are making some serious power you will never need a 70mm. That is kinda big even for a mustang.
On my JR, I have the S pipe bored to a 65mm to match my JG TB. I was looking at the STR 68mm but it was useless since the S pipe was only dont to 65mm.
Kris
__________________
Chavez Motorsports
The reason CMS fabrication is closed!! Click me!
11.965 @ 114 Supercharged Teg...RIP
Chavez Motorsports
The reason CMS fabrication is closed!! Click me!
11.965 @ 114 Supercharged Teg...RIP
Thread Starter
S1's MUSCLE RELAXER
Joined: Dec 2002
Posts: 3,844
Likes: 0
the inlet of the maifold i will be using is 65MM. if i was to get ahold of one of these i was planning on match porting the manifold to the throttlebody. that way there is perfect flow.
what modifications would i need to do tot he throttle body to get it working right? and what year RUSTang can i get it from?
what modifications would i need to do tot he throttle body to get it working right? and what year RUSTang can i get it from?
__________________
tamparacing.com
tamparacing.com
