Hey I have a 91 crx Hf that was bought as a shell, it's throwing code 15 Ignition output signal, Ive tried 2 diff dizzys and 2 ecu's and still the same thing, no spark. If someone knows what could be the problem with it or what pin it is in the ecu.. so maybe I could wire it direct, thanks. -Ben

 

what motor is in it, it may have one of the 3 white wires in the distributor plug swapped in the wrong spot, depending on what motor was or is in it now, also depending onthe year

 

its a 91 crx with a d16a6 in it... -Ben

 

Wire Your Dist Power Wire Up To A Switch And See If It Starts! It Will! Your Dist Isn't Getting Any Power!

 

what wire is the power? the blue wire on the 2 wire plugs? Thanks for the help. -Ben

 

I've tried hotwiring it, giving it direct power and still i cant get it to spark, still throwing code 15.. I cant figure it out.. -Ben

 

we got it cranked over but it wont stay running throwing codes 4 ( crank angle sensor) and 16 (fuel injector)

 

me and you are in the same boat man.. im throwing that same shit... i have the zc (similar to the d16) but yea mine stoped running.. so i bypassed (hotwire) the starter... get a positive wire and put it to the two connectors on the starter.. it should start up then.. this is how i have been starting mine up.. i have replaced the dizzy too.. cant figure it out yet.. but i will be tomorrow when i get some time.. so if i figure it out ill let you know..

 

sounds like an ignitior. When my hatch threw a code 15, it was the dizzy, ignitior and ign. coil.

 

fixed