Bouncing Idle
Thread Starter
King Ding-A-Ling
Joined: Jun 2002
Posts: 57
Likes: 0
Bouncing Idle
I have a 94 Civic Dx. I just put another 1.5 sohc motor in it. It was throwing code 10 and 14, but now isn't (found a plug not plugged in 
). The only problem I have now is the idle is bouncing. What is the cause and solution for that?
). The only problem I have now is the idle is bouncing. What is the cause and solution for that?
OEM Parts Specialist
Joined: Aug 2000
Posts: 2,717
Likes: 0
check the valve underneath the intake manifold...theres 3 or 4 10mm bolts and a hose or 2...take it off and screw the valve inside back in because over time it unscrews itself. then put it back together and you should be good...i have had to do that a couple of times...
__________________
:mugen member:
Joined: May 2002
Posts: 689
Likes: 0
code 14 idle air control (if U unplug it it will may stop idling like it is
but will still throw same code)replace it or fix it......
code 10 intake air temp sensor,check w/ a volt meter,CHECK to see if you have crossed the 2 plugs for the sensors,I think these 2 sensors have the same plug..they could be in the wrong place ?
but will still throw same code)replace it or fix it......
code 10 intake air temp sensor,check w/ a volt meter,CHECK to see if you have crossed the 2 plugs for the sensors,I think these 2 sensors have the same plug..they could be in the wrong place ?
__________________
813-377-5505
813-377-5505
