Honda/Acura Tech Honda tech discussion.

Need to know appropriate SHOT

Thread Tools
 
Old Dec 27, 2003 | 03:26 PM
  #1 (permalink)  
TRD_Tc's Avatar
Thread Starter
Using The Force Of N/A
 
Joined: Jul 2003
Posts: 3,792
Likes: 0
Default Need to know appropriate SHOT

I'm planning on adding nitrous to my car within the next 2 months but I want to know what kit I should buy for my car. I have a 99 Ls Teg with an air intake and header. What shot should I run and what kit (NOS, ZEX, etc....)? Thanks in advance fellas!
Reply
Old Dec 27, 2003 | 07:33 PM
  #2 (permalink)  
Mike K.'s Avatar
aka Distortion
 
Joined: Dec 2003
Posts: 999
Likes: 0
Default

If I was you and wanted to be safe I would go with a dry zex kit, spraying a 55 shot. Whatever you do once you get nitrous dont get the "jettys" which is keep turning the shot up cause its happened to a couple people I know and the outcome is really bad.
Mike
__________________


My Flickr Page:http://www.flickr.com/photos/mkloepfer/
Reply
Old Dec 27, 2003 | 07:47 PM
  #3 (permalink)  
hspmick's Avatar
-Mick-
 
Joined: Sep 2003
Posts: 177
Likes: 0
Default

on an LS I would run a tuned 75shot or atleast 65 shot! That motor can handle it, lower compression than most other honda motors out there...Just get the timing retarded to the safest degree with a tune and it will be fine! and Zex is very nice i ran it on my GSR and my buddy currently runs it on his GSR at a 55 shot with 90kmiles on his car
__________________
B18C1 build: Looking for 400+on pump gas. slowly coming along

Reply
Old Dec 27, 2003 | 08:34 PM
  #4 (permalink)  
sickazz-92HATCH's Avatar
how much psi!!!!!!!!!!!
 
Joined: Dec 2003
Posts: 135
Likes: 0
Default

i would go with a nx dry kit atleast a 55 shot
__________________
want a smoke and a pancake
Reply
Old Dec 28, 2003 | 08:38 AM
  #6 (permalink)  
Suspect's Avatar
Certified since '85
 
Joined: Jul 2003
Posts: 4,522
Likes: 0
Default

Originally posted by 02CavyZ24
go with the zex. nice and safe kit. not too hard to install either

that is all.......................
__________________

TR Hydroponics Abuser #36329
J a s o0o n: i need to get piss ass shit face fuck bag bitch ass drunk god damn
Reply
Old Dec 28, 2003 | 10:55 AM
  #7 (permalink)  
StricKlyMT's Avatar
aka civicke96
 
Joined: May 2003
Posts: 2,780
Likes: 0
Default

whatever you do joe dont run a dry kit make sure it is wet. i have had the best luck with nos honestly
__________________

"STRICKLY MT" Shop open for business
Tuning available for S300 and Kpro
727-510-6301 Tristan


11.99@116 All Motor K24 Civic Eg6 on Drag Radials

MattBuilt
Reply
Old Dec 28, 2003 | 06:55 PM
  #8 (permalink)  
Sunrise City Rider's Avatar
WHAT!?! OK!......
 
Joined: Jul 2002
Posts: 201
Likes: 0
Default

Run a Direct Port 100Shot with bottle Warmer, Nitrous Pressure Gauge, Fuel Pressure Gauge, Walbro Fuel Pump, Adjustable FPR, 1 stage colder plugs, and make sure you remove all the restrictions from your exhaust...
__________________
I work too damn Hard...

04 Civic Si
01 Lexus GS300
Reply




All times are GMT -8. The time now is 02:13 PM.