Hey Guys,

Also im going to go pick up this HPI Intercooler, the core measurements are 2 feet, by 1 foot, by 4 inches. The inlet/outlet are 3 inches in diameter for 200 bucks. Good deal?? Good intercooler??

Bare with me.. I know N/A.. I dont know crap about Turbo.. Thanks in advance

 

On your boost, power and rpm range....NO. Get the ITR or Skunk2 manifold.

Run a Hondata system, no FMU.

That IC sucks for your application. The inlets and outlets are too large. Go to http://www.precisionturbo.net/ for the turbo and intercooler.

 

Hey you think that this manifold is any good??

Getting it in a trade??

 

The JG mani? For your application it sucks.

 

This is what I was talking about

 

https://www.tamparacing.com/gallery/...php?photo=6907

 

So I shouldnt get that intercooler because it is too big.. I shouldnt get the JG because it is not good for my app..

What do I need to make these things work with my setup..

Im getting them nest to nothing.. so it makes sense to get these and upgrade if I need to .... let me know. thanks

 

Bump

 

In order for you to use the JG mani, you need to rev high, so a stock motor would not do it. Second, the I/C is too large. You need to be flowing a lot of air for the size to benifit you.

 

Hey Guys.. I was wondering if this would be too much for my app..

Let me know.. If it is a good deal.. or a good one for my car.. Let me know and im going to get it. Thanks in advance...

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2448678809