91 CRX seats -> 91 HB

Any one done it?

Any suggestions before i rip my stock rails off my stock seats and weld then onto the CRX ones?

 

umm you dont need to do any welding..... the put the civic rails on the crx seats.

the inside rails with bolt up fine but the outter ones will be too wide. get some metal strips from home depot and drill holes in them and bolt them to the rails and then the stock location on the floor. on the rear mounting hole you will need to make about an inch spacer so the seats dont sit crooked.

kind of hard to explain.

 

OR u can take the seat Ass cushin off the CRX it has a few c-clips
replace them with zip ties (Meatal plate under the ass cushin as well
& install the civic seat rail) & it will work perfect......done this 100times
PM me if interested
OR if you need help
OR CALL

 

thanx guys, i';ll still need help