Car Wont Fire Up
once your bit, your done.
Thread Starter
Join Date: Aug 2003
Posts: 1,789
Likes: 0
Received 0 Likes
on
0 Posts
ok i cleaned up the wires going into the main relay, now i need to put them on where i KNOW is the right place. now, i have
yellow/black > 2 wires
blue/white > 2 wires
black/yellow > 2 wires
green/black
yellow/black
yellow/white
black
can somebody tell me which color is for what and which port it goes on, on the main relay. #1 - 8
also, the battery should be at full 12 volts for the fuel pump to work? couldnt i just jump start it? what is the best way to go about this stupid shit....
yellow/black > 2 wires
blue/white > 2 wires
black/yellow > 2 wires
green/black
yellow/black
yellow/white
black
can somebody tell me which color is for what and which port it goes on, on the main relay. #1 - 8
also, the battery should be at full 12 volts for the fuel pump to work? couldnt i just jump start it? what is the best way to go about this stupid shit....
once your bit, your done.
Thread Starter
Join Date: Aug 2003
Posts: 1,789
Likes: 0
Received 0 Likes
on
0 Posts
i cleaned up the wires going into the main relay, now i need to put them on where i KNOW is the right place. now, i have
yellow/black > 2 wires
blue/white > 2 wires
black/yellow > 2 wires
green/black
yellow/black
yellow/white
black
can somebody tell me which color is for what and which port it goes on, on the main relay. #1 - 8
also, the battery should be at full 12 volts for the fuel pump to work? couldnt i just jump start it? what is the best way to go about this?
yellow/black > 2 wires
blue/white > 2 wires
black/yellow > 2 wires
green/black
yellow/black
yellow/white
black
can somebody tell me which color is for what and which port it goes on, on the main relay. #1 - 8
also, the battery should be at full 12 volts for the fuel pump to work? couldnt i just jump start it? what is the best way to go about this?