Stroked Motor Build Up
Guest
Posts: n/a
10.5 is abou the limit for FI (turbo/supercharger) Ive heard of people spraying with 12:1 compression before, although I don't wanna say that's safe.
Tuning would be the key with this motor. Thanks once again KJ.
IMHO: I don't see too much of an advantage with this motor.
Tuning would be the key with this motor. Thanks once again KJ.
IMHO: I don't see too much of an advantage with this motor.
So Lost!
Joined: Dec 2002
Posts: 7,807
Likes: 0
Originally posted by Cronic
What rods would he use? What would the R/S be on that setup? What pistons should he use?
Don't say you're done when you've just begun!
What rods would he use? What would the R/S be on that setup? What pistons should he use?
Don't say you're done when you've just begun!
Rods-Pistons are you going to use?
__________________
Im The Original Crab!
Im The Original Crab!
addicted to boost
Joined: Jun 2003
Posts: 888
Likes: 0
R/S Ratio would not be a problem, that is why you use a stock GSR crank.
I would use Golden Eagle Sleeves, Wiseco Pistons and Crower Rods. Stock GSR head.
You better get HONDATA.
Now can I be done?
I would use Golden Eagle Sleeves, Wiseco Pistons and Crower Rods. Stock GSR head.
You better get HONDATA.
Now can I be done?
__________________
Last edited by quickcivic; Aug 14, 2003 at 06:54 AM.
Below Me
Joined: Feb 2002
Posts: 0
Likes: 0
gsr crank would have to use gsr or type r rods. R/S would be 1.58/1
B16A can be bored to 84.5, and you could use a B17A crank. It would bring you to 1.8L. B17A rods will give you a r/s of 1.68/1 and would be your only choice other than aftermarket. Although the old prelude(B20A) might have rods near the same length and they should have the same size big end.
For 84.5mm pistons aftermarket is your only option.
B16A can be bored to 84.5, and you could use a B17A crank. It would bring you to 1.8L. B17A rods will give you a r/s of 1.68/1 and would be your only choice other than aftermarket. Although the old prelude(B20A) might have rods near the same length and they should have the same size big end.
For 84.5mm pistons aftermarket is your only option.
bored at work
Joined: Oct 2000
Posts: 4,263
Likes: 0
You'd use GSR rods rods w/ a gsr crank.
__________________
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richeypm me if you are interested in trying a free class at any of the gyms.
