GM Tech - Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn Tech Technical Discussion for General Motors Products both past and present

so, Nitrous ina V6 Camaro?

Old Oct 9, 2006 | 11:03 PM
  #11 (permalink)  
pimpjames's Avatar
42 72 69 6e 67 20 69 74
 
Joined: Dec 2005
Posts: 921
Likes: 0
Default

I agree with Frankie but if you feel froggy heres a site for 3.4, 3.8 turbo kits as well as LT1's and LS1's. The guy has been a member on Camaroz28.com and camarov6.com for quite some time (if not longer than me) and people are satisfied with all his kits. This link is for any F-body interested in going the turbo route.

Here you go BAD BIRD
Reply
Old Oct 12, 2006 | 05:12 AM
  #12 (permalink)  
HeavyChevy3800's Avatar
405hp=SLOW
 
Joined: Dec 2005
Posts: 497
Likes: 0
Default

75 wet shot will be a safe bet. 100 wet could be done as long as fuel and detenation is kept in check. The motors are built strong but the pistons are the weak point. Doesn't take much detenation to chip them.

Or you could go turbo. Get a T67 and start beating on the LS1s.
__________________

Last edited by HeavyChevy3800; Oct 12, 2006 at 05:17 AM.
Reply
Old Oct 12, 2006 | 11:10 AM
  #13 (permalink)  
first spray's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 32
Likes: 0
Default

yeh i wanted 2 getta turbo but i needa find sum sites tha have them for the v6 camaro, i wanna go turbo all the way but i got 91,xxx miles on tha motor n car sooo i donno? how that would work out as far as keeping my psi around6iah if it would even do much a diffrence n how long would it be till my engine goes bla bla bla
Reply
Old Oct 12, 2006 | 10:34 PM
  #14 (permalink)  
HeavyChevy3800's Avatar
405hp=SLOW
 
Joined: Dec 2005
Posts: 497
Likes: 0
Default

Visit FullThrottleV6.com - The V6 F-Body, W-Body, and N-Body Tech Source
__________________
Reply



All times are GMT -8. The time now is 04:37 AM.