i have a question??????
Banned
Joined: Dec 2004
Posts: 8,359
Likes: 0
so i traded my del sol for a freshly rebuilt turbo crx ....ive been going back and forth with proven power to get my car tunned and between the guy i got this car from... so here was my last straw today i pulled up to pp and one guy notices very light white smoke coming from my vc ....and he calls it blow by so he compression tested the car and with 9 5 1 cp pistons it pulled a 125 130 and 150 and 15o ....so they decide not to tune it...now im going back and forth with the guy i got the car from...and im getting frustrated ...... so heres my question the motor was just put together a 2 weeks ago ....so now my question is...if you rebuild a motor does it take time for rings to fit in your walls properly.that will lead to your comp going up? or is it a bad motor ...the car runs and drives fine...is there a for sure way i can check this?
What are plds? Is that some new drug? Or is that a new Turbo Kit?
Registered User
Joined: May 2005
Posts: 3,191
Likes: 0
if the engine was properly rebuild and you know what you doing you could breaking the engine on the street in couple of hours or on the dyno also .
__________________
My shit still slow
618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
My shit still slow618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
Pit Krew C.E.O.
Joined: Feb 2010
Posts: 2,805
Likes: 0
huh/?
__________________
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.
Registered User
Joined: May 2005
Posts: 3,191
Likes: 0
quick breakdown , bearings are properly measure (also breaking coating removed from bearings ) .correct ring gap ,correct honing patern and grid for the type ,material and end use of the rings .This is what i was trying to said .
__________________
My shit still slow
618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
My shit still slow618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
Pit Krew C.E.O.
Joined: Feb 2010
Posts: 2,805
Likes: 0
and you are a shop owner?
__________________
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.
Registered User
Joined: May 2005
Posts: 3,191
Likes: 0
Nope ,but i been a mechanic for 15 years . why?
this is a similar method we use to break in the engines
http://www.mototuneusa.com/break_in_secrets.htm
this is a similar method we use to break in the engines
http://www.mototuneusa.com/break_in_secrets.htm
__________________
My shit still slow
618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
My shit still slow618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
Last edited by BABILLARACING; Aug 22, 2011 at 06:16 AM.
Banned
Joined: Dec 2004
Posts: 8,359
Likes: 0
Nope ,but i been a mechanic for 15 years . why?
this is a similar method we use to break in the engines
Break In Secrets--How To Break In New Motorcycle and Car Engines For More Power
this is a similar method we use to break in the engines
Break In Secrets--How To Break In New Motorcycle and Car Engines For More Power
Registered User
Joined: May 2005
Posts: 3,191
Likes: 0
sorry about that , i am trying my best to explain myself
__________________
My shit still slow
618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
My shit still slow618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
Pit Krew C.E.O.
Joined: Feb 2010
Posts: 2,805
Likes: 0
Nope ,but i been a mechanic for 15 years . why?
this is a similar method we use to break in the engines
Break In Secrets--How To Break In New Motorcycle and Car Engines For More Power
this is a similar method we use to break in the engines
Break In Secrets--How To Break In New Motorcycle and Car Engines For More Power
But if youre knolwedgable(sp?) about your craft, thats what matters.
__________________
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.
Registered User
Joined: May 2005
Posts: 3,191
Likes: 0
Thank you sir , i just trying to help
__________________
My shit still slow
618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
My shit still slow618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
