process to making paint stick
Thread Starter
BOOST IS BETTER!
Joined: Jan 2004
Posts: 7,935
Likes: 0
process to making paint stick
....on rotors.. Will the regular "engine Enamel 500 deg" stuff work, or what do i need to do to get the paint to stay for a long time...thx
__________________
?
Thread Starter
BOOST IS BETTER!
Joined: Jan 2004
Posts: 7,935
Likes: 0
well, im doing the calipers too, and i got the "caliper paint" for them. YES, the rotors inner circle part. It gets all rusty if you dont paint it......BTW: im painting them JDM HOT PINK....
not really, black is my choice of color..
not really, black is my choice of color..
__________________
Retired Ricer...
Joined: Jan 2003
Posts: 11,813
Likes: 0
dont paint them, just use heatwrap... That seems to be the new hawtness these days.... 
__________________
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
Bolt-On 2v GT
Joined: Mar 2004
Posts: 8,713
Likes: 0
Originally Posted by InsaneCivicSedan
dont paint them, just use heatwrap... That seems to be the new hawtness these days....
__________________
"Does this look like a piece of crap to you? Like them spinnin' tires do you?"
"Does this look like a piece of crap to you? Like them spinnin' tires do you?"
Thread Starter
BOOST IS BETTER!
Joined: Jan 2004
Posts: 7,935
Likes: 0
Originally Posted by InsaneCivicSedan
dont paint them, just use heatwrap... That seems to be the new hawtness these days....
I WOULD! but I think Matt already did it dammit!....F'n heatwrap king he is....
__________________
Bolt-On 2v GT
Joined: Mar 2004
Posts: 8,713
Likes: 0
Rotor Painting
Tools Needed
Tape Measure
Poster-board
Rubbing Alcohol
Compass
Double Stick
Tape Hobby Knife
Painting your rotor hats not only keeps them looking good, but also protects them from rust. Any high temperature rated paint will work for this job. When choosing a paint look for one with a sustained heat rating of at least 600º. For a high-gloss colored finish, caliper paint will work well. For those of you looking for something more subdued and stock in appearance, BBQ grill paint will also work well. As with all painting, preparation is critical. Before you start to paint, remove any rust there may be and swab the entire surface to be painted with rubbing alcohol.
Using a tape measure, determine the diameter of the hat. Assuming a 7" diameter, set your compass for a 3.5" radius. Now draw and cut out a 7" hole in the center of your poster-board. You now have a template to protect the braking surface during painting. Using the piece that was cut out, make a shield for the area of the rotor that the rim comes into contact with. With that done, secure the paint shield to the rotor with double stick tape. Shown above are the two templates. Paint the two front rotors first, as they are smaller. When using spray paint multiple thin coats should be applied to avoid drips and runs. Once finished, you will be left with a set of very professional looking rotors that should look good for years.
The above rotor was painted with a semi-gloss black BBQ grill paint. Three coats were needed to achieve a smooth uniform appearance.
Tools Needed
Tape Measure
Poster-board
Rubbing Alcohol
Compass
Double Stick
Tape Hobby Knife
Painting your rotor hats not only keeps them looking good, but also protects them from rust. Any high temperature rated paint will work for this job. When choosing a paint look for one with a sustained heat rating of at least 600º. For a high-gloss colored finish, caliper paint will work well. For those of you looking for something more subdued and stock in appearance, BBQ grill paint will also work well. As with all painting, preparation is critical. Before you start to paint, remove any rust there may be and swab the entire surface to be painted with rubbing alcohol.
Using a tape measure, determine the diameter of the hat. Assuming a 7" diameter, set your compass for a 3.5" radius. Now draw and cut out a 7" hole in the center of your poster-board. You now have a template to protect the braking surface during painting. Using the piece that was cut out, make a shield for the area of the rotor that the rim comes into contact with. With that done, secure the paint shield to the rotor with double stick tape. Shown above are the two templates. Paint the two front rotors first, as they are smaller. When using spray paint multiple thin coats should be applied to avoid drips and runs. Once finished, you will be left with a set of very professional looking rotors that should look good for years.
The above rotor was painted with a semi-gloss black BBQ grill paint. Three coats were needed to achieve a smooth uniform appearance.
__________________
"Does this look like a piece of crap to you? Like them spinnin' tires do you?"
"Does this look like a piece of crap to you? Like them spinnin' tires do you?"
