Ok so any ideas on the yellow top? I'm guessing they are 19# b/c I've seen them on alot of 5.0 motors but I'm not sure anyone else know?? I can get the exact numbers off them if needed. I was shooting for a little bit larger injectors to go with all the porting etc. I know stock ones should be enough but I'd rather have too much than too little since I'm getting an a/f meter and controller anyways.

 

CHeck this link...good stuff:

www.escortfocus.com

 

been there wayyy wayyy over priced and they talk alot of garbage with no dynos to prove anything. Just times on the g-tech meter. Not saying they are bad but they are just out to make a big buck. I mean 70$ for an SPI controller that consists of a relay for 2$ a switch for 2$ and a wire that is less than 1$. Oh can't forget that "protective" shrouding for like 35 cents haha. Made one myself before they even came out =P Some of their stuff ain't bad tho.

 

My computer uses high impedance injectors and these injectors are a very bright yellow.

 

Do you think they may possibly be Accel injectors? Pretty sure those are bright yellow.

 

Yeah that's what I'm thinking I'll post the codes...NVM I looked at them and they say Ford right on them so I'm betting they are the 19# ones *sighs* It's ok though they were a "discount" pocket item from a j/y that I won't name lol

FOTE-D5A and 280150943 is the numbers on it anyways.

 

I found this great injector site that lists like all injectors but it just told me what engines they were in which was the 3.8 and a 4.6 sohc my brother pulled them out of the car and I bet he pulled them out of the 3.8 i took the tb off of for my car bleh.

http://www.student.kun.nl/p.oonincx/...jectordata.pdf