Correcting speedo?
what can i get to correct my speedo from being off because i have 4.10 gears or where can i take it to have this fixed?
__________________
If speed kills then I'm suicidal
If speed kills then I'm suicidal
Originally posted by PowerRanger92
I dunno about the older Fords but they changed mine on my old truck by cahnging the gear in the tranny. The new ones can be changed on the computer I thought.
I dunno about the older Fords but they changed mine on my old truck by cahnging the gear in the tranny. The new ones can be changed on the computer I thought.
__________________
If speed kills then I'm suicidal
If speed kills then I'm suicidal
Originally posted by stangerang
chip or a speed cal unit or a gear in the tranny
the gear in the tranny is the cheapest (like $15) and takes about 1 minute to do
chip or a speed cal unit or a gear in the tranny
the gear in the tranny is the cheapest (like $15) and takes about 1 minute to do
__________________
-Ryan-
-Ryan-
Originally posted by stangerang
gear in the tranny
the gear in the tranny is the cheapest (like $15) and takes about 1 minute to do
gear in the tranny
the gear in the tranny is the cheapest (like $15) and takes about 1 minute to do
__________________
If speed kills then I'm suicidal
If speed kills then I'm suicidal
automotive engineering might have it..... but if not buy a muscle mustangs and fast fords mag... and about all of the parts places in there will have it
__________________
200 points away from a 300
200 points away from a 300
Even if you use a 23 tooth speedo gear, you are still going to be off a few MPH. The best way to do it is with a Speed Cal on the 96 and newer cars.
Originally posted by T/S #25
Even if you use a 23 tooth speedo gear, you are still going to be off a few MPH. The best way to do it is with a Speed Cal on the 96 and newer cars.
Even if you use a 23 tooth speedo gear, you are still going to be off a few MPH. The best way to do it is with a Speed Cal on the 96 and newer cars.
__________________
www.coastaldyno.com

Smackin down LS1s since 99', LQ4s too...
www.coastaldyno.com

Smackin down LS1s since 99', LQ4s too...


