anyone have one of those tools for rolling the fender lip they would lend out or rent.

jonathon

 

thread on here if you SEARCH, a guy will rent it to you reasonable.

 

Jonathon,

Here is that guy's post that rents his....
https://www.tamparacing.com/forums/f...rlando-fl.html

If this is for a fox, just cut them out. I used an saws all (with a shortened blade) and it came out fine....

 

What exactly needs cut? Anyone have a photo of the cut area?

 

Feel in the wheel well, under the rear window and you will notice the lip. It sticks out and will grab the tire.

You basically want to be careful, but go in there and cut it out. I used to roll it up with an old wood baseball bat, but this was soo much cleaner!! You really only need to do this if you have the wrong wheel offset or your running a wide tire.

This what I cut out;



From here;

 

Thanks, that may actually help out alot soon.

 

thanks guys, my bf' 295/35/18's are just a bit to wide. i was hoping that someone closer had one. its on my 04. they are rubbing just in the front a bit. i will have to use the bat method.