rear end question
Guest
Posts: n/a
Six of one, half dozen of the other, but you may want to just make sure you get the parts from the same company. From what I understand, Strange and Moser cuts the splines with a very slight difference in profile, which can create stress concentrations if you mix the parts.
Thread Starter
Registered User
Joined: Oct 2004
Posts: 331
Likes: 0
alright thanks how much power will the stock axels hold?????? b/c i have a 3500 stall and all motor about 450-500hp n/a then i will be spraying like a 200 shot but will they hold without spray?????
Last edited by blown1989stang; Apr 13, 2006 at 08:14 PM.
Registered User
Joined: May 2004
Posts: 1,518
Likes: 0
Originally Posted by blown1989stang
alright thanks how much power will the stock axels hold?????? b/c i have a 3500 stall and all motor about 450-500hp n/a then i will be spraying like a 200 shot but will they hold without spray?????
My stock axles shattered with 500 RWHP on drag radials. Now I'm running 31 spline Strange axles with an Auburn diff. Over 600 RWHP and over 600 TQ with a manual trans. No problems so far.
Let me know when you get that thing running I'd like to see it.
__________________
Life moves pretty fast. If you don't stop and look around once in awhile, you could miss it.
-- Ferris Bueller --
Life moves pretty fast. If you don't stop and look around once in awhile, you could miss it.
-- Ferris Bueller --
Last edited by JDL1000; Apr 14, 2006 at 12:57 AM.
