The shakes.
Thread Starter
is doing your girlfriend
Joined: Dec 2004
Posts: 7,101
Likes: 0
Originally Posted by 69Boss521
Your discombobulator can become out of line with your flux capacitor......
Was the converter new?? You may have a converter out of balance or your input shaft is shot. Is the tranny new?
Was the converter new?? You may have a converter out of balance or your input shaft is shot. Is the tranny new?
I guess im going to have to pull the tranny and check the flexplate bolts.
__________________
Governments are instituted among Men, deriving their just powers from the consent of the governed, — That whenever any Form of Government becomes destructive of these ends, it is the Right of the People to alter or to abolish it
PORK CHOP SAMICHES!!!!!
Joined: Dec 2003
Posts: 2,840
Likes: 0
Even though you have a hardened input shaft it may be off. I would do this. Pull the converter and tranny. Run the motor, if it shakes its in the motor. I bet you its either the converter or the tranny itself. I have ordered Nodular Iron cranks that were "Balanced" from the company that shipped it to me and when my machinist checked it the crank was waaaaay off. New parts can be bad and old parts can go bad when you put a new part on them..... don't ask me why.
__________________
Derp!
Derp!
