Cobra Brakes on Fox - What do I need?
Thread Starter
addicted to boost
Joined: Jun 2003
Posts: 888
Likes: 0
Cobra Brakes on Fox - What do I need?
Want to go 5 lug on my fox. Looking to go 03/04 Cobra Brakes - Front and rear.
What do I need and where is the best place to get it?
What do I need and where is the best place to get it?
__________________
Guest
Posts: n/a
Front you will need:
SN95 Spindles and hubs
Rotors
Caliper Brackets
Calipers
Brake lines
Pads
Rears you will need pretty much the same, along with the axles from a solid rear cobra, plus the parking brake setup. Plus you will need to at least upgrade the master cylinder
Or you can just call FRPP and order the whole kit in one piece
SN95 Spindles and hubs
Rotors
Caliper Brackets
Calipers
Brake lines
Pads
Rears you will need pretty much the same, along with the axles from a solid rear cobra, plus the parking brake setup. Plus you will need to at least upgrade the master cylinder
Or you can just call FRPP and order the whole kit in one piece
Guest
Posts: n/a
$2300? Are you sure thats not the 00 Cobra R brake kit and not the base cobra upgrade kit?
PPI had the cobra/bullit front kit for $450 last time I checked, it was everything you needed minus the pads and spindles.
You can also just do the Mark VII rear brakes which can be had for a lot cheaper
PPI had the cobra/bullit front kit for $450 last time I checked, it was everything you needed minus the pads and spindles.
You can also just do the Mark VII rear brakes which can be had for a lot cheaper
Redneck Yatchclub member
Joined: Oct 2005
Posts: 1,398
Likes: 0
Ford part# FRD M-2300-K Upgrades your 87-93 Fox to 93 Cobra R/ 94 cobra specs. Comes complete with axles,spindles,13.0 front and 11.65 rear rotors,master,booster, prop valve and all hoses and hardware. Its the most complete kit you can get. your right it aint cheap!! There are less expensive alternatives!!
__________________
