351w??
Thread Starter
Sweet Lincoln's mullet
Joined: Jun 2003
Posts: 667
Likes: 0
Well i feel that it wont be agressive enough in the long haul, I have break in time and then i might move over to something like this.
Lift: .499 in. intake / .510 in. exhaust
Duration: .275 intake / .279 exhaust
Lobe Separation: 112 Degrees
Any ideas on a tranny shop?
Lift: .499 in. intake / .510 in. exhaust
Duration: .275 intake / .279 exhaust
Lobe Separation: 112 Degrees
Any ideas on a tranny shop?
__________________
-Derek-
-Derek-
Thread Starter
Sweet Lincoln's mullet
Joined: Jun 2003
Posts: 667
Likes: 0
CRT ok great thanks! they are actually right around the corner from me...
Crt Performance Trans Inc
Address: 12820 Daniels Dr # 16, Clearwater, FL 33762
Phone: (727) 556-0090
Crt Performance Trans Inc
Address: 12820 Daniels Dr # 16, Clearwater, FL 33762
Phone: (727) 556-0090
__________________
-Derek-
-Derek-
is doing your girlfriend
Joined: Dec 2004
Posts: 7,101
Likes: 0
Im using a Crane Energizer cam .484/.512 with 272 int./284 exh. in my 351 heads are stock E7s with some light porting on the exhaust side. Motor is strong through power band. Car weighs about 3500-3600#s also using the Aeromotive Street Rod pump. using a aeromotive carb regulator. great pump seems to be a bit quiter than a Holley.
__________________
Governments are instituted among Men, deriving their just powers from the consent of the governed, — That whenever any Form of Government becomes destructive of these ends, it is the Right of the People to alter or to abolish it
Need To Get Quicker
Joined: Dec 2001
Posts: 894
Likes: 0
I wouldn't have CRT rebuild the transmission in my lawnmower.
Need To Get Quicker
Joined: Dec 2001
Posts: 894
Likes: 0
Past problems. Several of our customers that have used them and then we had to pick up the pieces.
Of course, it's just like everything else, I have heard of people that were happy with their work.
Of course, it's just like everything else, I have heard of people that were happy with their work.
Registered User
Joined: Aug 2003
Posts: 1,399
Likes: 0
i have had good experiences with anything he has done for me...did the c-4 in my old car, glide in the new car, just did an aode for 2 days ago, all have worked really well
chad
chad
__________________
www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
Guest
Posts: n/a
Originally Posted by Steve B
why not an e cam? it has great street manor in a carb setup and a nice broad torque curve, which is great for a heavy ass truck.
