Ford, Lincoln, Mercury Tech Automotive Related Topics Only !

my terminator is shutting off..

Thread Tools
 
Old Mar 2, 2005 | 05:33 AM
  #1 (permalink)  
luderacer's Avatar
Thread Starter
Dain Bramage
 
Joined: Aug 2003
Posts: 276
Likes: 0
Default my terminator is shutting off..

so yesterday afternoon i installed my KN FIPK and to my knowledge hooked everythihng back the wya it is supposed to be. so after taking it for a few test runs everything is fine but later that night after going WOT it would turn off when i came to slowing down. this did not happen everytime but about 3 out of 15 times or so. no check engine lights are on so i dont have a clue. anyone got any ideas? thanks

joe
__________________
im like a sore dick, ya just cant beat me!!


Reply
Old Mar 2, 2005 | 06:23 AM
  #2 (permalink)  
Leonard's Avatar
OUCH!!!
 
Joined: Mar 2002
Posts: 3,441
Likes: 0
Default

Clean your MAF sensor. You probably had too much oil on the filter and it sucked some through the intake and onto the sensor.
Reply
Old Mar 2, 2005 | 07:02 AM
  #3 (permalink)  
the anti-rice's Avatar
finally painted the car!
 
Joined: Oct 2001
Posts: 2,177
Likes: 0
Default

Might also be the TPS (Throttle Position Sensor). Mine would cut out when I was slowing down. What really sux is that when the car shuts off, you loose power steering and your brakes. Good luck.
__________________
-Ryan-

Reply
Old Mar 2, 2005 | 07:39 AM
  #4 (permalink)  
quickcivic's Avatar
addicted to boost
 
Joined: Jun 2003
Posts: 888
Likes: 0
Default

Do you have a Predator?

I would def check the TPS and the MAF for "gunk"
__________________
Reply
Old Mar 2, 2005 | 09:33 AM
  #5 (permalink)  
CBRTRX's Avatar
car with tiny wheels
 
Joined: Nov 2003
Posts: 550
Likes: 0
Default

sounds like the infamous stall problem some 03's had, the dealer has a new tune that should fix it but try the other ideas first
__________________
in memory of Kevin Gonzalez 6/21/86 - 9/13/06
Reply
Old Mar 2, 2005 | 11:59 AM
  #6 (permalink)  
luderacer's Avatar
Thread Starter
Dain Bramage
 
Joined: Aug 2003
Posts: 276
Likes: 0
Default

where is this bastard of a TPS located. ill check the MAF for gunk. luckily today it hasnt done it but that doesnt say much. thanks for the help
__________________
im like a sore dick, ya just cant beat me!!


Reply
Old Mar 2, 2005 | 12:16 PM
  #7 (permalink)  
03SNAKE's Avatar
Registered User
 
Joined: Oct 2004
Posts: 35
Likes: 0
Default

i had a similar problem after the install of an aftermarket CAI. I had changed the position of the MAF not realizing it. Someone hinted to me to position it back to 10-12 o'clock. Never had a problem again. May not be your issue, but check to see if the MAF is positioned where it was orginally....
Bo
__________________
2008 Shelby GT500 Black Coupe
JLT CAI, MRT H-pipe, FRPP Axle back
BMR UCA,LCA's and Panhard bar (Adujustable)
532rwhp/572rwtq

2003 SVT Cobra Coupe.....SOLD
#154 of 8694
Reply
Old Mar 2, 2005 | 06:47 PM
  #8 (permalink)  
Jakethesnake's Avatar
Bombs over Baghdad...
 
Joined: Sep 2003
Posts: 1,297
Likes: 0
Default

+1 on te position of the MAF alhtough I have a KNN (abhout to go pro-m) and it never had that problem before, I never oiled mine or anything though so that may be the culprit
__________________
Proud OIF/OEF Veteran and still serving
Reply




All times are GMT -8. The time now is 12:34 PM.