what size cam will clear piston/w/no/eybrow
Registered User
Joined: Aug 2004
Posts: 567
Likes: 0
Just get a piston flycutting tool and you won't have to worry about it anymore.
Briane
Briane
__________________
Red 93 GT with only 9000 original miles on it.
HP Performance Stage 1 Street kit with 60mm turbo
Car Pics
11.29 @ 126 mph 16 psi
16 lbs of boost 509 rwhp/626 rwtq
12 lbs of boost 433 rwhp/571 rwtq
********STOCK MOTOR*******
Red 93 GT with only 9000 original miles on it.
HP Performance Stage 1 Street kit with 60mm turbo
Car Pics
11.29 @ 126 mph 16 psi
16 lbs of boost 509 rwhp/626 rwtq
12 lbs of boost 433 rwhp/571 rwtq
********STOCK MOTOR*******
Need To Get Quicker
Joined: Dec 2001
Posts: 894
Likes: 0
Get yourself a set of TFS Twisted Wedge heads and one of their Stage 2 camshafts and you'll be all set.
Thread Starter
The lost pony
Joined: Dec 2003
Posts: 998
Likes: 0
From: spring hill
where do I get a cutting tool ? the tfs heads are a little out of my budget but I have built a motor with that combo before but the heads were ported. it did not have much lower end torque, had lots of top end power though
Thread
Thread Starter
Forum
Replies
Last Post
