Derek's (Strokd85) Backfire From TR #10
refinish artist
Joined: May 2003
Posts: 3,941
Likes: 0
I think he prolly sprays more hp than most cars make with a power adder on this site.LOL
__________________
Visit my TR Shop Forum
RIP Chester P.Anderson Jr.9/23/05 I love you dad,and miss you very much.
RIP Kevin"Slo SI" 9/13/06,we will miss you homie,time heals wounds but you will never be forgotten
Visit my TR Shop Forum
RIP Chester P.Anderson Jr.9/23/05 I love you dad,and miss you very much.
RIP Kevin"Slo SI" 9/13/06,we will miss you homie,time heals wounds but you will never be forgotten
Need To Get Quicker
Joined: Dec 2001
Posts: 894
Likes: 0
I believe it is about 370 cubic inches with 1 stage on it. Somewhere close to 300 if I'm not mistaken.
And it went an 8.65 not an 8.56. Sorry.
And it went an 8.65 not an 8.56. Sorry.
Registered User
Joined: Jun 2004
Posts: 2,983
Likes: 0
Originally posted by T/S #25
I believe it is about 370 cubic inches with 1 stage on it. Somewhere close to 300 if I'm not mistaken.
And it went an 8.65 not an 8.56. Sorry.
I believe it is about 370 cubic inches with 1 stage on it. Somewhere close to 300 if I'm not mistaken.
And it went an 8.65 not an 8.56. Sorry.
__________________
Jeff
93 Coupe - check out my blog - http://www.93coupe.com
01 Cobra - Stockified - Wife Owned and operated
68 Coupe PROJECT <- Been in the family for 25 years!
Jeff
93 Coupe - check out my blog - http://www.93coupe.com
01 Cobra - Stockified - Wife Owned and operated
68 Coupe PROJECT <- Been in the family for 25 years!
refinish artist
Joined: May 2003
Posts: 3,941
Likes: 0
LOL sorry
__________________
Visit my TR Shop Forum
RIP Chester P.Anderson Jr.9/23/05 I love you dad,and miss you very much.
RIP Kevin"Slo SI" 9/13/06,we will miss you homie,time heals wounds but you will never be forgotten
Visit my TR Shop Forum
RIP Chester P.Anderson Jr.9/23/05 I love you dad,and miss you very much.
RIP Kevin"Slo SI" 9/13/06,we will miss you homie,time heals wounds but you will never be forgotten
Guest
Posts: n/a
I have a ton more vids and now that I have figured them out I wil be posting a lot more of them tonight. 
I think I have his 8 second pass, look for it later. And as Joe said it was not hurt because they hauled ass after the pop. I would not have posted it if it would have broke something.
I think I have his 8 second pass, look for it later. And as Joe said it was not hurt because they hauled ass after the pop. I would not have posted it if it would have broke something.
Donut Killer
Joined: Jun 2002
Posts: 2,747
Likes: 0
Originally posted by Scott
I have a ton more vids and now that I have figured them out I wil be posting a lot more of them tonight. I think I have his 8 second pass, look for it later. And as Joe said it was not hurt because they hauled ass after the pop. I would not have posted it if it would have broke something.
I have a ton more vids and now that I have figured them out I wil be posting a lot more of them tonight.
I think I have his 8 second pass, look for it later. And as Joe said it was not hurt because they hauled ass after the pop. I would not have posted it if it would have broke something.
__________________
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
Daddy-O
Joined: Aug 2001
Posts: 3,300
Likes: 0
Man I hate hearing that sound....
Motor just didn't want to rev on the transbrake.
We pulled 1 deg of timing out across the board to be safe.. this was the result.. We put it back in and she's happy again.. go figure...
The next pass was quite a ride, wish I had a camera in car..
Going to have the guys over at Fordspeed go through the motor shortly so that it's ready for the Stock Suspension race season that starts in about a month..
Thanks again for all of the kind words.
Derek
Motor just didn't want to rev on the transbrake.
We pulled 1 deg of timing out across the board to be safe.. this was the result.. We put it back in and she's happy again.. go figure...
The next pass was quite a ride, wish I had a camera in car..
Going to have the guys over at Fordspeed go through the motor shortly so that it's ready for the Stock Suspension race season that starts in about a month..
Thanks again for all of the kind words.
Derek
__________________
I am your penalty.....
I am your penalty.....
Donut Killer
Joined: Jun 2002
Posts: 2,747
Likes: 0
Well Scott's camera takes to lights better than mine did. However, this is what I was able to get.
Right Click and Save as...Warm Up
Right Click and Save as...Bang
Right Click and Save as...Warm Up
Right Click and Save as...Bang
__________________
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
