Baseline dyno #'s.....
Registered User
Joined: Nov 2004
Posts: 55
Likes: 0
car had to have full exhaust 2.5in with tail pipes
still had to have PS
non race underdrives, normal FMS blue ones
car was and still is a street car that is mild mannerd
only thing I took off was the AC, still had the smog pump attached LOL, off road flowtech X pipe with dynomax mufflers.
drag race set up suspension makes no bearing in the Hp the car makes.....car ran 12.31@110 on ET streets
still had to have PS
non race underdrives, normal FMS blue ones
car was and still is a street car that is mild mannerd
only thing I took off was the AC, still had the smog pump attached LOL, off road flowtech X pipe with dynomax mufflers.
drag race set up suspension makes no bearing in the Hp the car makes.....car ran 12.31@110 on ET streets
00 Yzf R1
Joined: Jun 2004
Posts: 234
Likes: 0
so u guys think my dyno #'s are around that area with gt-40p,stock intake(ported),tf stage 1,crane 1.7rockers, maf coversion with 24 lb inj, shorty headers,o/r h-pipe,dumps, pullies would that make me around that?
The little 5.0 that could
Joined: Apr 2003
Posts: 13,275
Likes: 0
Originally posted by 88stang5.0
so u guys think my dyno #'s are around that area with gt-40p,stock intake(ported),tf stage 1,crane 1.7rockers, maf coversion with 24 lb inj, shorty headers,o/r h-pipe,dumps, pullies would that make me around that?
so u guys think my dyno #'s are around that area with gt-40p,stock intake(ported),tf stage 1,crane 1.7rockers, maf coversion with 24 lb inj, shorty headers,o/r h-pipe,dumps, pullies would that make me around that?
__________________
-Vince
-Vince
Guest
Posts: n/a
Keep in mind I've owned the car for 3 days and it has no tuning done. It has 1.6 rr's and a 65mm tb, stock pulley. There is a little more left in it with this setup. I was just getting a baseline on the car before I start the modding.
Non DSM.....DSM guy
Joined: Apr 2002
Posts: 4,417
Likes: 0
Originally posted by URFUCT
Keep in mind I've owned the car for 3 days and it has no tuning done. It has 1.6 rr's and a 65mm tb, stock pulley. There is a little more left in it with this setup. I was just getting a baseline on the car before I start the modding.
Keep in mind I've owned the car for 3 days and it has no tuning done. It has 1.6 rr's and a 65mm tb, stock pulley. There is a little more left in it with this setup. I was just getting a baseline on the car before I start the modding.
Stop playing around. I know you have some nitrous kits laying around. I like you Camaro better but the fox looks pretty good. You going to come out and play with it one of these weekends?
__________________
Tom
Tom
Donut Killer
Joined: Jun 2002
Posts: 2,747
Likes: 0
Will,
That is a nice base line, keep us up to date on the mods and HP changes....
That is a nice base line, keep us up to date on the mods and HP changes....
__________________
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
