Rev Exteme wants 350 for labor, thats not including the install kit. I have the gears already, I just need to find some one or some place to do it for me. Can anyone help?

 

Try coastal or blue oval corral

 

Call Joe or Rob @ Fordspeed, not sure of the prices. Don't shop for the cheapest price shop for the best service, price shopping will get you nothing but a car full of everyone eleses opinions except yours..

 

Oh come on you all know you want that whirring sound from a badly shimmed gear! Try Coastal, they definately know what they're doing.

 

Better late than never,we do the install for $200.00 and guarrantee the set up.727-561-9440

 

Did mine myself, no noise. "Usually" - if you are using a motorsport gear to replace a motorsport gear, you can measure the shims and you should find that the shims from the original setup will transfer over to the new gears.

http://www.corral.net/tech/drivetrain/gears.html

Likely the hardest part is crushing the new crush sleeve. I did mine on jackstands - my impact was not strong enough, had to use huge breaker bar and feet method

Jeff
www.stangonline.com

 

James from Race Related did mine, did a great job. I would also recommend Ford Speed and Coastal.

Briane

 

Jeff from blue oval corral did my gears, i bought a 3:73 gears and had them installed with all new bearings all the way around for $400.00 and havent had a lick of trouble. i highly recommend Blue oval for this project. 727-571-1996