getting rid of the lowering shit.. time to get out of the 2.0 60s. Looking for a good setup street and strip. I know there are a number of companys out there. I am looking for feedback whos hot, whos not? whats the best setup to get me out of 2.0 60s for the money.... any suggs insite is much appreciated.

Thanks,
Cody

right now i have eibach lowering springs with mac upper and lower C/As

 

Lakewood 90/10's up front. Some sort of 50/50's out back. Keep the lowering springs in the front and get a set of drag springs w/air bag in the rear. I ran this setup on my '87 convertable. With MegaBite Jr's it hooked quite well, and didn't have the silly front wheel gap associated with drag springs.

 

yea im leaning toward the baged drag kit from Eibach also... any other suggestions?

 

Keep the springs and get some 90/10's and 50/50's. I have Eibach lowering springs with stock worn out shocks and struts and I cut low 1.8's with stock control arms.

 

If you want to keep your ride height and hook better, check out the fox spring setup- usually 4-cyl springs up front and v8 springs in the rear (cut to your liking). Def. some 90/10s also... I wouldn't expect much from aftermarket shocks, as the stock shocks are basically 50/50s, on '99-up cars anyway.

-Mike

 

Leave that shit stock and use the money for more power!LOL

 

www.maximummotorsports.com

 

90/10's, 50/50, take off your sway bar if you haven't already

 

imagine what my clutch would have done if i took off the sway bar.. lol... i think the swaybar is deff coming off next time i hit the track... the Eibach bag is looking like the way im gunna go. Well see what happens... after i get a good cluch. Thanks for the info guys