The next person with a header...
Rod Bearing Eater
Join Date: Apr 2002
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Speaking of turbo location if it wasnt for the ducting and the valve cover you could probably trick people (if they dont know much about Dodges) into thinking it was NA. That would be funny as hell to see someone disguise the Turbo ducting and use a TBI valve cover.
__________________
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
Rod Bearing Eater
Join Date: Apr 2002
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by "Someone"
Originally posted by FearThe4Doors
oh fuck tripod. ill post a pic later when i plug in my old HD
Originally posted by FearThe4Doors
oh fuck tripod. ill post a pic later when i plug in my old HD
__________________
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
Rod Bearing Eater
Join Date: Apr 2002
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
whos valve cover is that and what the heck did they weld to the front?
__________________
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
Guest
Posts: n/a
my valve cover. its from a newer TBI with the cast alum ones not the stamped steel ones. You can see the welded thing better on that last pic. It is connected with a hose to the block as seen in the next pic. (see the big brass barb at the bottom)Its a crankcase equalization tube.
