I left the 2.4 valve cover on it since its shorter and causes less hood clearance problems, I would like to get some pictures though..I tend to go out on wed to the chick fillet on lumsden in brandon after 9pm(after work, though I didnt go yesterday, having a strange misfiring problem I think is due to ancient plug wires, will be buying new wires tomorrow and this weekend switching full control of spark to my standalone, previously had the stock computer run spark and the standalone fuel, but I think its causing strange things to happen that way, IE my stock computer still takes a reading from the NA MAP sensor which causes it to pull timing in boost since the stock computer thinks boost is bad, therefore throwing the fuel table for the standalone off causing bad spluterring and no boost, I think the cause is my old MAP clamp no longer working, thing only worked when it wanted to anyway, luckily now that I have a standalone its no longer needed) ok, now that I have gone off on a tangent for most of the post...yeah, I'd love to get some pics(all my undeveloped pics are of the engine build anyway)