Track Video
__________________
You can quit watching me now....
You can quit watching me now....
You are correct it is a 'low speed' track.
Top speed on the track is 100, 110 if I REALLY pushed. Its a 1.3 Mile track.
All others that day had similar top speeds, right around the 100 mark. I was probably the only fool that tried to kill the back stretches.
The turn in the middle is the slowest, for me its around 40-45. We have in car video of someone spinning out there around 55MPH, and he is an experienced driver.
Coming out the last turn, is about 70-80 accelerating WOT.
Top speed on the track is 100, 110 if I REALLY pushed. Its a 1.3 Mile track.
All others that day had similar top speeds, right around the 100 mark. I was probably the only fool that tried to kill the back stretches.
The turn in the middle is the slowest, for me its around 40-45. We have in car video of someone spinning out there around 55MPH, and he is an experienced driver.
Coming out the last turn, is about 70-80 accelerating WOT.
__________________
You can quit watching me now....
You can quit watching me now....
Very nice Cali. Looks like a ton of fun man. Need to get your video guy a tripod. lol
__________________
Mopar STS w/ BB's
Mopar BOV
Mopar Drop in Air Filter
Mopar 7.5 Plug wires
Mopar Tension Strut Replacements
Mopar Stage 1 Springs
Dodge GT/ACR Bars
Needswings.com MICBC
I get mine from Performance Dodge!
CarDomain
Mopar STS w/ BB's
Mopar BOV
Mopar Drop in Air Filter
Mopar 7.5 Plug wires
Mopar Tension Strut Replacements
Mopar Stage 1 Springs
Dodge GT/ACR Bars
Needswings.com MICBC
I get mine from Performance Dodge!
CarDomain
Mopar STGII Coils, w ride height of 14" front 14.25 rear (from center of wheel to fender lip). Hotchkis sway bars, and poly bushings all around.
For insurance I have Motor mount inserts. Sold the solid mounts....Inserts work just as good with the LCA Poly bushings.
For insurance I have Motor mount inserts. Sold the solid mounts....Inserts work just as good with the LCA Poly bushings.
__________________
You can quit watching me now....
You can quit watching me now....
Thread
Thread Starter
Forum
Replies
Last Post



