Prototype ...........Strut bars by (Me)
Has to many projects
Thread Starter
Join Date: Aug 2005
Posts: 4,594
Likes: 0
Received 0 Likes
on
0 Posts
Prototype ...........Strut bars by (Me)
These are some things that will be going into production by the 16th of next mo, showing them at the JDM Up's show.
95SingleSlamCivic (matt) and I are makeing these
Would like some feed back, LMK what you guys think
Thanks
Chris
Colors available in
Black
Silver
Gun Metal
Other colors are available but at a little bit higher price.
Laser cut Strut ends
This is a full trunk cage.....will be available in ROUND AND SQUARE tube. The Square will be cheaper. This one was made this way because of the Bat box; most will have an X in the center tying the strut tower to the Main frame bolts. This will be powder coated in black today so I will have more pics up.
I will also be making just the strut bars and just trunk bar separate.
Trunk bar in a 94-01 Integra and EJ
PC black
C-pillar bar, 94-01 TEG (note I will only be making the C-pillar bar for the TEG.
Just to show there is head clearance but they are for OFF ROAD USE ONLY!!! and should not have anyone back there.
C-pillar bars and trunk bars
The trunk cage is good enough to eat or sleep on, right Matt? lol
Thanks for looking will have more pics up after PC....
95SingleSlamCivic (matt) and I are makeing these
Would like some feed back, LMK what you guys think
Thanks
Chris
Colors available in
Black
Silver
Gun Metal
Other colors are available but at a little bit higher price.
Laser cut Strut ends
This is a full trunk cage.....will be available in ROUND AND SQUARE tube. The Square will be cheaper. This one was made this way because of the Bat box; most will have an X in the center tying the strut tower to the Main frame bolts. This will be powder coated in black today so I will have more pics up.
I will also be making just the strut bars and just trunk bar separate.
Trunk bar in a 94-01 Integra and EJ
PC black
C-pillar bar, 94-01 TEG (note I will only be making the C-pillar bar for the TEG.
Just to show there is head clearance but they are for OFF ROAD USE ONLY!!! and should not have anyone back there.
C-pillar bars and trunk bars
The trunk cage is good enough to eat or sleep on, right Matt? lol
Thanks for looking will have more pics up after PC....
__________________
Cburke.industries.
Custom suspension bars, metal fabrication.
Cburke.industries.
Custom suspension bars, metal fabrication.
Last edited by CBURKE; 09-27-2008 at 01:58 PM.
i would put it as far left and right on the top tube as possible, you could even notch them to weld it onto the tabs you have there and the top bar, keeping the cross bracing as close to 45 as possible
__________________
Mechanical Engineer - Naval Surface Warfare Center PCD, Marine Corps. Counter IED Development
USF Formula and Baja racing Alumni/Consultant
Mechanical Engineer - Naval Surface Warfare Center PCD, Marine Corps. Counter IED Development
USF Formula and Baja racing Alumni/Consultant
Last edited by BLUE2KSS; 07-27-2008 at 07:41 AM.
Has to many projects
Thread Starter
Join Date: Aug 2005
Posts: 4,594
Likes: 0
Received 0 Likes
on
0 Posts
Cool thanks for the info.. I see what you mean I will give that a try.. Again thanks
__________________
Cburke.industries.
Custom suspension bars, metal fabrication.
Cburke.industries.
Custom suspension bars, metal fabrication.
who do you have doing the laser cut for you?
__________________
Mechanical Engineer - Naval Surface Warfare Center PCD, Marine Corps. Counter IED Development
USF Formula and Baja racing Alumni/Consultant
Mechanical Engineer - Naval Surface Warfare Center PCD, Marine Corps. Counter IED Development
USF Formula and Baja racing Alumni/Consultant
Last edited by BLUE2KSS; 07-27-2008 at 09:22 AM.