your asking 3500 as it sits?

 

Yes, with no motor or tranny and stock struts and springs instead of the coilovers.

I'm not parting any more of the car out unless somebody wants the wheels.

 

confused... didnt he just say that it was back together???? jw... if so then let me know

 

werent you selling it for 3.5K w/ the motor at first?
now its still 3.5 w/ no motor?

 

price for the wheels?

 

UPDATE 3/25

I am now selling the shell only for 3.5k As is with no decals and stock struts and springs instead of the coilovers.


To finish the car you will need to bolt everything back in the car, including the motor and tranny which I will include.

For what is listed below I paid 10k plus 1k shipping about a month ago. I am trying to not take that big of a loss but I am willing to entertain a variety of offers including trades + cash. I can also take parts off to make better trades or sell the car for less.






EXTERIOR MODIFICATIONS

OEM JDM S15 Silvia Front End Conversion
VIS Vented Carbon Fiber Hood -
Authentic Nismo Body Kit
Nismo S15 R-Tune Prototype Front Bumper (first one in U.S.)
Nismo S14 Aero Side Skirts
Nismo S15 Smoked Side Marker Lights
SEIDO Rear Bumper
JDM OEM S14 Kouki Wing
AIT Racing/B-Magic 30mm Widebody Quarter Panel Extensions
JDM OEM S14 Window Rain Guards
Ganador Mirrors
Custom Molded Sparco Fuel Door (key is broken off in the lock)
JDM OEM Silvia Emblems
JDM Nismo Carbon Fiber B Pillars
JDM Style Yellow Headlight Tint
Smoked Taillights

WHEELS TIRES AND BRAKES

SportMax 18x8.5(FR) 18x9.5(RE)
Falken Azenis ST-115 225/40/18(FR) 255/35/18(RE)
Custom Painted 300ZX Twin Turbo 4-Piston Calipers
Nismo 50mm extended wheel studs
Nismo 50mm extended racing lug nuts
Brembo Rotors
Nismo Brake Cooling Ducts
EBC Brake Pads

SUSPENSION MODIFICATIONS

TEIN HA 16-way adjustable Coilover Suspension
TEIN Camber Adjustable Upper Pillowball Mounts
TEIN Tension Rods
Cusco Carbon Fiber Rear Strut Bar
Suspension Techniques Sway Bars --Nismo Power Brace--
Nismo Polyurethane Bushings
LS Automotive Solid Subframe Bushings
Seam/Stitch Welded Chassis
Cusco 6 pt. Roll Cage

ENGINE/DRIVETRAIN MODIFICATIONS
***ENGINE WAS TAKEN APART AND NEW PARTS LISTED BELOW ARE INCLUDED IN SALE PRICE**

JDM S13 Redtop SR20DET Swap(Stroked to 2.1 Liter)
Greddy Baffled Oil Pan
Eagle H-Beam Connecting Rods
Nismo Bearings
87mm CP Forged Pistons (8.5:1 compression)
AEBS Sleeves
HKS 264 Step 2 Camshafts
Greddy Dual Valve Springs
HKS Rocker Arm Stoppers
3 angle Valve Job
Port and Polish
Jim Wolf Bronze Valve Guides
Titanium Valve Retainers
HKS External Wastegate
HKS Oil Cap
HKS Super Sequential Blow Off Valve
HKS Circle Earth Ground Wires
HKS Super Mega Flow Intake
Custom Stainless Steel Equal Length Exhaust Manifold
Custom 3 inch Intercooler Piping
3.5 inch Cat Back Exhaust (no downpipe)
Greddy TD06-25G Turbocharger
Mine's ECU
Nismo Fuel Pressure Regulator
Nismo Thermostat
Greddy Oil Catch Can
Blitz LM Front Mount GTR Intercooler
Nismo Motor Mounts
Nismo Radiator Cap
Walbro Fuel Pump
Unorthodox Racing Lightweight Crank Pulley
Viscous Limited Slip Differential
Nismo Clutch Fork Pivot

INTERIOR MODIFICATIONS

Recaro Pole Position/Braille Auto Development Bucket Seat
Stitch Welded Interior
Stripped and Painted Floor
Takata 340R 4-pt Harness
CUSCO 6-pt Roll Cage
Tekniq Autosport Teckademics Steering Wheel and Snap Off System
DM Gauge Cluster (KPH)
Custom Suede Door Panels/ Center Console
NISMO GT Shift Knob and Short Shifter
HKS Boost Guage
Greddy EGT Guage
GIZZMO Electronics Launch Controller(Two-Step)
Apexi Super AFC
Custom Stillen Skyline Style Center Pod
Carbon Fiber Dash Kit
Cusco E-Brake Drift Knob
Carbon Fiber Switch Panel and Battery Shut-Off Switch

Missing parts needed to complete package:

Injectors, Cams, Engine Management, downpipe.

I have all of these parts that I bought within the last few weeks. If someone buys the car as it is I will cut you a deal on the extra parts:

AEM EMS for SR redtop - no sensors are included
HKS 272 intake and exhaust cams for S13 SR
SARD Fuel Rail + 1000cc SARD injectors for 13 SR
4 - 740cc HKS sidefeed injectors for stock fuel rail
Z32 to SR mazworx conversion kit - comes with kit and machined z32 tranny --will sell for extra instead of SR tranny.

then you quoted me and said yes, 3.5K w/ no motor, tranny and struts.


origionaly it sounded like you were including a disassembled motor (i.e. my red highlight above in your origional post, now its still 3.5K w/ no motor or any of the listed parts?

 

I doubt he would sell a strocked(or even built) SR for 3500... And the fact that its in a widebody s14.5... Dude stay out of his thread...

Bump for you buddy...

 

well read it and it sounds like it.

 

Shell Is Now At An All Time Low Price.

 

Hey,did u say u r selling the this shell for 3 thousand before and now its at an all time low?How much is it now? cuz i have the money to blow,especially for a full shell.when i say shell i mean full interior and everything u listed except the motor and tranny.