resinking carbs .... how????
Thread Starter
Registered User
Joined: Jan 2003
Posts: 183
Likes: 0
resinking carbs .... how????
i just got my first bike... i gotta do some work to it , but before i bought it i was told that it was dropped so the carbs were out of sink... i have never heard of that... how do i resinchronize 4 carbs... do i need to have someone mess with the linkeage? it runs fine but when you get on it at about 2500-3300... it hesitates for a sec , i was thinking it was just boggong down but dont know anything about a sport bike so i dont know how they are supposed to act... when it gets above that and hits the power band its gone.............. literally.. any thoughts.... oh and the owner said the carbs were just rebuilt...
Thread Starter
Registered User
Joined: Jan 2003
Posts: 183
Likes: 0
how much does he charge? the guy i bought it from said it came with a jet kit, he said it started running different after he dumped it, so unless it unlodged some small piece of debris i dont think it would be the jets , but thanks for the input... what shop does your friend work at , i probably need the bike looked over...
My Balls Hurt
Joined: May 2004
Posts: 2,638
Likes: 0
check everything.. your coils, plug wires,plugs, check all ur fuses.
the carbs should be all tied in. when u give it gas see if all the carb open the same. do u have airfilters or a airbox?..
the carbs should be all tied in. when u give it gas see if all the carb open the same. do u have airfilters or a airbox?..
__________________
bikes
-73 kawasaki z1 900/ 05 cbr600rr motor
-06 675 117whp 52fttq
AIM- B16aTeggy
bikes
-73 kawasaki z1 900/ 05 cbr600rr motor
-06 675 117whp 52fttq
AIM- B16aTeggy
Dragging Plastics
Joined: Jan 2004
Posts: 1,532
Likes: 0
If it is indeed the jetting and not that the carbs need to be resyncronized then you would need to have a dyno with an air/fuel meter and an experienced dyno tech. Like the one R&R performance has. 813.662.9850
__________________
Do you really have to start a thread every time you go on a ride and see a guy with no helmet on?
Does it affect you that much that some random guy 1500 miles away went and paid his own money for a 1000?
Do we really have to fight over who uses the back brake or not?
Do you have to argue over stupid pointless shit on the Internet?
Do you really have to start a thread every time you go on a ride and see a guy with no helmet on?
Does it affect you that much that some random guy 1500 miles away went and paid his own money for a 1000?
Do we really have to fight over who uses the back brake or not?
Do you have to argue over stupid pointless shit on the Internet?
Thread Starter
Registered User
Joined: Jan 2003
Posts: 183
Likes: 0
oh yeah , i made my first mistake last night , never try to unload a bike off a truck by yourself!!! i tried to make a ramp out of a table but the damn thing fell and the bike rolled over on my leg, hurt BAD , so i hope that is the worst thing that happens to me with this bike.... if there is any other biking for dummies advice , please feel free to share it with me
Thread Starter
Registered User
Joined: Jan 2003
Posts: 183
Likes: 0
the bike does not run bad, it is hardly noticeable, i just want evrything perfect , it could even be that i am getting on it at to low of rpms .... but i need to have someone take it around the block to make sure it is fine..
