speaker question
Thread Starter
Ballin Beretta
Joined: Mar 2007
Posts: 1,186
Likes: 0
speaker question
will amplifing the car door speakers will make a huge difference? such as clarity? or more bump?....to me i think it is a waste of money on buying another seperate amp just to give the speakers 40-50watts while the h/u give out alittle power alone.
what you guys think?
what you guys think?
__________________
Registered User
Joined: Jun 2006
Posts: 1,593
Likes: 0
Yes it does make a difference.
__________________
Need anything installed or built? PM me.
MECP Certified.
Alarm: Viper 5200
HU: Stock
Active Set-Up
Tweets: Image Dyamics CD1pro mini horns
Mids: Sundown Neo Pro 8s
Amp: Kicker IX500.4 (2)
Sub Stage
Subs: (2) Dayton Audio 15" HF
Amp: Kicker IX1000.1
Need anything installed or built? PM me.
MECP Certified.
Alarm: Viper 5200
HU: Stock
Active Set-Up
Tweets: Image Dyamics CD1pro mini horns
Mids: Sundown Neo Pro 8s
Amp: Kicker IX500.4 (2)
Sub Stage
Subs: (2) Dayton Audio 15" HF
Amp: Kicker IX1000.1
isuck
Joined: May 2010
Posts: 491
Likes: 0
big difference.
__________________
LOGIC? You seriously want to invoke logic in a conversation about fake hijackings, missiles hitting the pentagon, and bombs planted throughout the world trade center? I thought it was a given that logic was checked at the door when entering one of these threads.
Now there's some logic!
Registered User
Joined: May 2007
Posts: 194
Likes: 0
Yeah it makes a huge diffeence espicially if you have good speakers.
__________________
Pm me for your welding needs. I do most minor welding, tack welding, and some exhaust.
2000 v6 mustang 5 speed
shorty headers with cats, o/r h-pipe, 2.5 true duals with flowmasters, ported and polished maf, ported and polished tb, fenderwell cold air intake, short shifter, and zoom stage one clutch and assembly.
R.I.P Dustin...Forever a friend...Forever a brother.
Pm me for your welding needs. I do most minor welding, tack welding, and some exhaust.
2000 v6 mustang 5 speed
shorty headers with cats, o/r h-pipe, 2.5 true duals with flowmasters, ported and polished maf, ported and polished tb, fenderwell cold air intake, short shifter, and zoom stage one clutch and assembly.
R.I.P Dustin...Forever a friend...Forever a brother.
Registered User
Joined: Apr 2005
Posts: 1,243
Likes: 0
Compare your '4x50' headunit to a 4x50 amp. First, the headunit is much smaller, and it has to have all the headunit stuff, as well.
Then, check the power. Best case, 200 watts takes about 14 amps (14.4 v, 100% efficient) while most headunit only have 5-10amp fuses
I'm not saying that headunit manufacturers lie, but...
Toby
Then, check the power. Best case, 200 watts takes about 14 amps (14.4 v, 100% efficient) while most headunit only have 5-10amp fuses
I'm not saying that headunit manufacturers lie, but...
Toby
isuck
Joined: May 2010
Posts: 491
Likes: 0
That's what you're CLEARLY saying Toby 
.
On top of the fact that you don't have to worry about the low power output of those internal amps, you have a lot less noise and clearer sound (as long as you have good wires that are set up PROPERLY).
Take advantage of and fine tune the crossovers built into most amps, thus allowing you to raise the volume even higher while protecting your speakers AND making them sound "better". (better being a subjective term)
.On top of the fact that you don't have to worry about the low power output of those internal amps, you have a lot less noise and clearer sound (as long as you have good wires that are set up PROPERLY).
Take advantage of and fine tune the crossovers built into most amps, thus allowing you to raise the volume even higher while protecting your speakers AND making them sound "better". (better being a subjective term)
__________________
LOGIC? You seriously want to invoke logic in a conversation about fake hijackings, missiles hitting the pentagon, and bombs planted throughout the world trade center? I thought it was a given that logic was checked at the door when entering one of these threads.
Registered User
Joined: Jun 2006
Posts: 1,593
Likes: 0
Compare your '4x50' headunit to a 4x50 amp. First, the headunit is much smaller, and it has to have all the headunit stuff, as well.
Then, check the power. Best case, 200 watts takes about 14 amps (14.4 v, 100% efficient) while most headunit only have 5-10amp fuses
I'm not saying that headunit manufacturers lie, but...
Toby
Then, check the power. Best case, 200 watts takes about 14 amps (14.4 v, 100% efficient) while most headunit only have 5-10amp fuses
I'm not saying that headunit manufacturers lie, but...
Toby
__________________
Need anything installed or built? PM me.
MECP Certified.
Alarm: Viper 5200
HU: Stock
Active Set-Up
Tweets: Image Dyamics CD1pro mini horns
Mids: Sundown Neo Pro 8s
Amp: Kicker IX500.4 (2)
Sub Stage
Subs: (2) Dayton Audio 15" HF
Amp: Kicker IX1000.1
Need anything installed or built? PM me.
MECP Certified.
Alarm: Viper 5200
HU: Stock
Active Set-Up
Tweets: Image Dyamics CD1pro mini horns
Mids: Sundown Neo Pro 8s
Amp: Kicker IX500.4 (2)
Sub Stage
Subs: (2) Dayton Audio 15" HF
Amp: Kicker IX1000.1
