What Kind Of Gaskets To Use
All American, rice eater!
Thread Starter
Join Date: Jul 2005
Posts: 2,167
Likes: 0
Received 0 Likes
on
0 Posts
What Kind Of Gaskets To Use
I Got Some Ls6 Gm Heads For My 454 -
2.30 Intake/ 1.88 Ex Manley Sever Duty Valves
Awsome Port Work... Bowls Have Be Blended
New Valve Job And New Guide Cut For Pc Seals? (what Is That?)
They Also Have Been O-ringed
(a Ring That Sticks Out On The Head About 1/32 Of A Inch)
Need Help On What Head Gaskets To Use?
2.30 Intake/ 1.88 Ex Manley Sever Duty Valves
Awsome Port Work... Bowls Have Be Blended
New Valve Job And New Guide Cut For Pc Seals? (what Is That?)
They Also Have Been O-ringed
(a Ring That Sticks Out On The Head About 1/32 Of A Inch)
Need Help On What Head Gaskets To Use?
Has V.I.P in HELL!
Join Date: Jan 2004
Posts: 8,987
Likes: 0
Received 0 Likes
on
0 Posts
i believe u will also have to get the block oringed 2 not sure though.the oring is like a gasket its self.alot of n2o cars use this.as for gasket i like sce gaskets.but felpro will work or what ever u prefore.
__________________
Registered User
Join Date: Feb 2004
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
i thought so too and use a copper gasket. but i was reading at sce site that you don't have to o-ring the block too. one or the other but the o-ring can only stick out so far.
Registered User
Join Date: Feb 2004
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
this is what i was reading. http://www.scegaskets.com/techtips/engineprep.html
there's other info about about copper head gaskets on there site. http://www.scegaskets.com/techtips/index.html
i don't know if you can take out the o-ring and just run a plain jane gasket if your not going to run high compression or nitrous.
there's other info about about copper head gaskets on there site. http://www.scegaskets.com/techtips/index.html
i don't know if you can take out the o-ring and just run a plain jane gasket if your not going to run high compression or nitrous.
Last edited by 74javelin; 03-10-2006 at 07:24 AM.
