A neon question....not about lighting [Archive]

FearThe4Doors

08-07-2002, 04:51 PM

my neon fozzle nozzles sometimes interfere with my sight when i'm doing 250mph outrunning the cops squeezin my NAWS hard after getting caught in a street race when i was walkin on a Lamo hard. dawg.

FearThe4Doors

08-07-2002, 04:52 PM

but seriously, i think it's non

FearThe4Doors

08-07-2002, 04:52 PM

but i really have no clue

FearThe4Doors

08-07-2002, 04:53 PM

lori would be the one to ask

FearThe4Doors

08-07-2002, 04:53 PM

or 808

FearThe4Doors

08-07-2002, 04:53 PM

or maybe 8r14n if he ever decides to come on anymore. Think it;s his wonderful mac?!? :lol:

FearThe4Doors

08-07-2002, 04:54 PM

i just wanted to reply and feel special, so i did

FearThe4Doors

08-07-2002, 04:54 PM

and i do

FearThe4Doors

08-07-2002, 04:54 PM

why? are you 2.4 swapping the Type K?

mpbiv

08-07-2002, 04:55 PM

Well, one of my fellow co workers who is also going to UF is selling a 95 neon for 500. He claims it has bent valves from the timing belt snapping. I wanted to check out whether this was possible.

FearThe4Doors

08-07-2002, 05:03 PM

just might be..

BIG_Truck_Driver

08-07-2002, 06:05 PM

anything is possible.

Bent 3 exhaust valves in my 72 318 when the Timing chain went.
I can't imagine that the motor was an interference motor due to it being an american v8 from the early 70's.

CrazyMoparGirl

08-07-2002, 11:18 PM

Neon Interference engine, Walter's truck, Non Interference. Pushrod engines are overhead valves, where as Over head Cam engines are Cam(s) over the valves/ or in the head depending how you look at it.

FearThe4Doors

08-08-2002, 03:14 AM

Originally posted by "CrazyMoparGirl"

Neon Interference engine

damn, that sucks shit. I should do a belt on karens car soon. Its at around 75-80k i think.

BTW Lori, do SOHC's need valves adjusting? She's got a ticking noise in the top end like it's low on oil, but its not.

CrazyMoparGirl

08-08-2002, 11:26 AM

Timing belt isn't required until 110K as far as the ticking my Neon ticked and we came to the conclusion that mine was my injecytors ticking. We dumped so Injector cleaner and did a baisic tune up and changed belts and the ticking quieted some. I had 30psi of oilat Idle.

rb70383

08-08-2002, 03:22 PM

on older V8's it depends whne the chain lets loose. ON the 440 I had it went at idle no interefence, but Walters truck, we we taking off from a light. So.........the cam stopped turning brfore the crank snd smack. It made its own clearance.

FearThe4Doors

08-08-2002, 03:33 PM

i would think the cam would always stop turning before the crank. The crank spins pretty freely and has the momentum.. the cam has to push all the springs and would come to an immediate stop

rb70383

08-08-2002, 06:40 PM

Originally posted by "FearThe4Doors"

i would think the cam would always stop turning before the crank. The crank spins pretty freely and has the momentum.. the cam has to push all the springs and would come to an immediate stop

OH shit you might be learning afterall!!! :bigthumb::thefinger:

FearThe4Doors

08-08-2002, 09:31 PM

so why were you acting like your time was different?

rb70383

08-09-2002, 05:19 AM

Huh?

FearThe4Doors

08-09-2002, 11:08 AM

:withstupid:

CrazyMoparGirl

08-10-2002, 02:42 AM

Speaking of Neon's, I saw a bad ass neon tonight at the track, ran 14.0-14.2, had a nice dual cam lope to it too, low 14 may not sound like much but I'm 1100ft above sea level, OMG was it nice too bad the owner was a dick.

FearThe4Doors

08-10-2002, 11:48 AM

Lori... work me out a trade here! I want your ACR engine! It was just noted that the driver and pass side engine mounts for 2.0s are a direct bolt in for 2.2s! The front reqires a little fab, but nothing major!

EEeeeeeiiiiiiiiiiiiii!!!!!!!!!!!!!!

CrazyMoparGirl

08-10-2002, 01:25 PM

Oh really hmmmmm

flybyuin2.2

08-10-2002, 02:30 PM

now you got me thinking since the Neon DOHC motor is a cousin of the T3 motor in Spirit or Daytona R/T, man! i miss my Spirit R/T :( hey i do have access to Neon motors don't know what type but will find out soon as far as the distributor just run it of the cam like modified T3's so you can still use the stock or modified T2 computer.
p.s. are you sure about the pass. mount?

FearThe4Doors

08-10-2002, 04:39 PM

Both Neil Emiro and the guy who helped him make the T3 neon confirmed this.

flybyuin2.2

08-10-2002, 06:06 PM

i believe he ran a T2 module with it too. i guess i'll pick up a Neon motor and start a new project .

CrazyMoparGirl

08-10-2002, 07:42 PM

I think you can use any 2.0L block, can't remeber for sure, but any DOHC engine is just like the one I have, PCM is the difference

mpbiv

08-10-2002, 08:14 PM

does this mean mounting a 2.4 in a K wouldn't be very hard?????????

Damn why do I have to hear this right before I am planning to get a SOHC turbo engine, now I am getting crazy thoughts of a DOHC 2.4 Turbo :twisted:

CrazyMoparGirl

08-10-2002, 08:16 PM

I was thinking the same but in a certain OMNI or possibly a Dakota or possibly that Aries I have sitting in Zhills

leadfootedfool

08-11-2002, 11:12 PM

oooo, all motor 2.0 in the omni, all motor 2.4 in the dakota, and big hairy turbo 2.4 in the aries.

Whyss?? I don't know, just sounds cool.

CrazyMoparGirl

08-11-2002, 11:14 PM

Id rather use the 2.4 than the 2.0, cause I just dont like the 2.0 all those years of trying to build one up all for nothing but a 15.8 1/4 et

leadfootedfool

08-11-2002, 11:16 PM

Well, hopefully I can persuade back to the happy little revvy 2.0. But I have no time slips and no tuning to the motor yet.

CrazyMoparGirl

08-11-2002, 11:17 PM

how many miles are you at?

leadfootedfool

08-11-2002, 11:18 PM

3500?

leadfootedfool

08-11-2002, 11:18 PM

Its well broken in....

CrazyMoparGirl

08-12-2002, 12:05 AM

is that on the 2.0L?

leadfootedfool

08-12-2002, 12:37 AM

yep...

CrazyMoparGirl

08-12-2002, 02:28 AM

Well let's crack that baby open and have some fun shall we???? Please say yes

rb70383

08-12-2002, 07:37 AM

We can try the new underdrive cam gears. http://www.plauder-smilies.com/eek7.gif

FearThe4Doors

08-12-2002, 12:20 PM

HAHAHAHAHAHAHAAHAHAH

leadfootedfool

08-12-2002, 02:20 PM

try the underdrive cam gears????

I already have them.......

rb70383

08-12-2002, 06:59 PM

:doh: sorry just offering some help. :lol:

leadfootedfool

08-12-2002, 07:24 PM

they were good for 98.31 hp at the wheels.....

CrazyMoparGirl

08-12-2002, 08:57 PM

Originally posted by "leadfootedfool"

they were good for 98.31 hp at the wheels.....

What? :?

leadfootedfool

08-12-2002, 10:20 PM

Originally posted by "CrazyMoparGirl"

they were good for 98.31 hp at the wheels.....

What? :?

:? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :? :?

:lol:

CrazyMoparGirl

08-12-2002, 10:29 PM

Who?

leadfootedfool

08-12-2002, 11:35 PM

What?

leadfootedfool

08-12-2002, 11:35 PM

When?

leadfootedfool

08-12-2002, 11:35 PM

Where?

leadfootedfool

08-12-2002, 11:35 PM

Why?

CrazyMoparGirl

08-12-2002, 11:46 PM

Cause

leadfootedfool

08-13-2002, 12:25 AM

well fine then

CrazyMoparGirl

08-13-2002, 12:56 AM

Originally posted by "leadfootedfool"

I used to think an escort wagon with a 5 spd would be cool........

My buddy had an Aspen station Wagon, 360 4 speed that thing rocked

leadfootedfool

08-13-2002, 12:58 AM

ahhh!!! that was supposed to stay in ffa, i'll have to keep my head bowed in shame here

leadfootedfool

08-13-2002, 01:00 AM

And the real bomb diggity would be a vw squareback or one of the old 2 dr vega wagons.

And yes, I like the dodge rampage too. :P :P

FearThe4Doors

08-13-2002, 02:11 AM

Originally posted by "leadfootedfool"

they were good for 98.31 hp at the wheels.....

which wheels? if you dont pay $271.59 for the kit to balance it.. you may end up driving in circles.

CrazyMoparGirl

08-13-2002, 02:16 AM

I have a POS Rampage, needs a ton of work

FearThe4Doors

08-13-2002, 02:18 AM

i think there's a group you can join for that

CrazyMoparGirl

08-13-2002, 02:20 AM

Read your sig

leadfootedfool

08-13-2002, 02:39 AM

Originally posted by "FearThe4Doors"

i think there's a group you can join for that

Wasn't that charter racing team?

rb70383

08-13-2002, 06:53 AM

Originally posted by "CrazyMoparGirl"

I have a POS Rampage, needs a ton of workhttp://www.thedodgegarage.com/hall/hall_deans_ram.jpg

rb70383

08-13-2002, 07:06 AM

http://members.cox.net/daytona.iroc/rampage/teram1.jpg

FearThe4Doors

08-13-2002, 11:42 AM

Originally posted by "rb70383"

http://members.cox.net/daytona.iroc/rampage/teram1.jpg

d00d! thats the twin engine one!

FearThe4Doors

08-13-2002, 11:44 AM

Originally posted by "CrazyMoparGirl"

Read your sig

ok. done. that was fun.

Umm... :?

Gooo.... reeeaaaaddd...... ummm..... the topic of this thread

CrazyMoparGirl

08-13-2002, 11:45 AM

Neon question....not about lighting :D

FearThe4Doors

08-13-2002, 11:47 AM

wow. i almost cannot take in any more fun this early in the morning.

rb70383

08-13-2002, 11:52 AM

it isnt even 9 am here

FearThe4Doors

08-13-2002, 12:01 PM

and this pretains to me how...?

rb70383

08-13-2002, 12:04 PM

Originally posted by "FearThe4Doors"

and this pretains to me how...?

FearThe4Doors

08-13-2002, 12:07 PM

rb70383

08-13-2002, 01:28 PM

FearThe4Doors

08-13-2002, 01:48 PM

rb70383

08-13-2002, 02:03 PM

:thumbup:

FearThe4Doors

08-13-2002, 02:20 PM

thumb up your ass

CrazyMoparGirl

08-13-2002, 04:05 PM

Ok now there will be no thumbs up 808's ass, or mine for that matter