Raced a nasty looking GSR today.
TR Registered Member #5
Thread Starter
Join Date: Jun 2000
Posts: 7,377
Likes: 0
Received 0 Likes
on
0 Posts
I went to brandon mall with my GF to get a hair cut and do a little shoe shopping. Then I left to come back to the dorm here at USF it wasnt raining and I didnt feel like getting stuck in it. So im getting on the interstate and there is this red teg behind me like 94-97 body style. We get on the interstate and merge. He then drives by me sorta fast and i could hear his vtec come on. This has to be the most nappy GSR ive ever seen it was red with the factory ground effects painted yellow and some nappy small rims on his car. So I he gets behind me and I hit it and pull him a little bit then it leveled off pretty even. I let off about 95 bc it was still wet outside. I was pretty impressed that i pulled him a little bit. Seems like the accords best power is 3-4 gear. but i always get wasted by the tegs off the line just for the fact that my car weighs 2905 lbs. ohhh well pretty good race though. Of course when i let off he drove by and did the ricer fly by and then cut off hard onto the I4 exit.
------------------
ZEX etc. check site
http://www.geocities.com/markaccord95
moderating since feb 2000
------------------
ZEX etc. check site
http://www.geocities.com/markaccord95
moderating since feb 2000
__________________
http://www.floridaracing.org
Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
http://www.floridaracing.org
Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
TR Registered Member #5
Thread Starter
Join Date: Jun 2000
Posts: 7,377
Likes: 0
Received 0 Likes
on
0 Posts
Well what did you expect? A decent Drag? sorry buddy youd have to race a TransAm for that kinda challenge.
__________________
http://www.floridaracing.org
Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
http://www.floridaracing.org
Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
Guest
Posts: n/a
good kill mark just curious what motor do you have in your accord and also did you use the nos...just curious cause i have a gsr and i have never had an accord walk on me with the motor but never the less good kill!!!
------------------
teal 94 integra gsr 99 saw blades aem intake &cam gears. moderating since sep. 2000
skunk 2 coilovers
------------------
teal 94 integra gsr 99 saw blades aem intake &cam gears. moderating since sep. 2000
skunk 2 coilovers
TR Registered Member #5
Thread Starter
Join Date: Jun 2000
Posts: 7,377
Likes: 0
Received 0 Likes
on
0 Posts
huh???
------------------
ZEX etc. check site
http://www.geocities.com/markaccord95
moderating since feb 2000
Originally posted by "Someone"
Originally posted by flounder:
What a coincidence my friend is a hair stylist at the Brandon mall.
Originally posted by flounder:
What a coincidence my friend is a hair stylist at the Brandon mall.
------------------
ZEX etc. check site
http://www.geocities.com/markaccord95
moderating since feb 2000
__________________
http://www.floridaracing.org
Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
http://www.floridaracing.org
Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
TR Registered Member #5
Thread Starter
Join Date: Jun 2000
Posts: 7,377
Likes: 0
Received 0 Likes
on
0 Posts
Hey mark you are running a 10lb bottle right?? How much to fill it and where??
------------------
97CavyZ24
16.0 1/4
Soon to be Bottle Fed!
__________________
http://www.floridaracing.org
Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
http://www.floridaracing.org
Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
TR Registered Member #5
Thread Starter
Join Date: Jun 2000
Posts: 7,377
Likes: 0
Received 0 Likes
on
0 Posts
i dont know about tampa but here in bradenton we take our bottles to a&e and the cost is 35 bucks for a 10 pound bottle. and it usualy takes them all day to get it done.
------------------
teal 94 integra gsr 99 saw blades aem intake &cam gears. moderating since sep. 2000
skunk 2 coilovers
[This message has been edited by NosExtreme (edited 09-19-2000).]
------------------
teal 94 integra gsr 99 saw blades aem intake &cam gears. moderating since sep. 2000
skunk 2 coilovers
[This message has been edited by NosExtreme (edited 09-19-2000).]
__________________
http://www.floridaracing.org
Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
http://www.floridaracing.org
Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
Guest
Posts: n/a
25 bucks on us 19 right next to discount auto parts [cant remember the name] near 54th ave n
freeze the bottle yourself they will do it immediately.its an american store but the guys alright
------------------
Ryan
97 civic ex 14.01 97mph
[This message has been edited by 97ex (edited 09-19-2000).]
freeze the bottle yourself they will do it immediately.its an american store but the guys alright
------------------
Ryan
97 civic ex 14.01 97mph
[This message has been edited by 97ex (edited 09-19-2000).]
TR Registered Member #5
Thread Starter
Join Date: Jun 2000
Posts: 7,377
Likes: 0
Received 0 Likes
on
0 Posts
A&E by busch and 56th do it for $19.95 $21.30 after tax.
------------------
ZEX etc. check site
http://www.geocities.com/markaccord95
moderating since feb 2000
------------------
ZEX etc. check site
http://www.geocities.com/markaccord95
moderating since feb 2000
__________________
http://www.floridaracing.org
Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
http://www.floridaracing.org
Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP