dont know what to do
^there only one set of bbs that fit my car and coudnt find anythign on those two web sites
__________________
http://profile.my
space.com/index.cfm?fuseaction=user.viewprofile&friendid=102 514185
https://www.tamparacing.com/classifi...3/limit/recent
for sale tsw 17s
http://profile.my
space.com/index.cfm?fuseaction=user.viewprofile&friendid=102 514185https://www.tamparacing.com/classifi...3/limit/recent
for sale tsw 17s
Heres the link bro read up and see what u can do with that scirocco
Welcome to the VWFixx.com Tuning Guide
Welcome to the VWFixx.com Tuning Guide
it an 82 and wich engine swap should i do a g60 or what
__________________
http://profile.my
space.com/index.cfm?fuseaction=user.viewprofile&friendid=102 514185
https://www.tamparacing.com/classifi...3/limit/recent
for sale tsw 17s
http://profile.my
space.com/index.cfm?fuseaction=user.viewprofile&friendid=102 514185https://www.tamparacing.com/classifi...3/limit/recent
for sale tsw 17s
thanx for that web site know i know what im going to do and on the engine swap i have a 1.8 in it
__________________
http://profile.my
space.com/index.cfm?fuseaction=user.viewprofile&friendid=102 514185
https://www.tamparacing.com/classifi...3/limit/recent
for sale tsw 17s
http://profile.my
space.com/index.cfm?fuseaction=user.viewprofile&friendid=102 514185https://www.tamparacing.com/classifi...3/limit/recent
for sale tsw 17s
Budget power plan for your Rocco:
get a 3A block out of an Audi 80/90, or get a full ABA engine from a 93-98 2.slow (preferably the ABA due to the cross-flow head design)
run a megasquirt ecu w/ a digi1 (corrado g60) wiring harness/fuel system
find a cheap turbo (older saab 900's, volvo 240/740/940's all used Garrett T3's)
double stack headgaskets to lower compression
upgrade FPR and injectors when need be depending on boost
replace the rivets that hold your diff w/ a HD bolt kit, or take a jackhammer directly to the tranny to speed up the impending doom that would otherwise happen
get a 3A block out of an Audi 80/90, or get a full ABA engine from a 93-98 2.slow (preferably the ABA due to the cross-flow head design)
run a megasquirt ecu w/ a digi1 (corrado g60) wiring harness/fuel system
find a cheap turbo (older saab 900's, volvo 240/740/940's all used Garrett T3's)
double stack headgaskets to lower compression
upgrade FPR and injectors when need be depending on boost
replace the rivets that hold your diff w/ a HD bolt kit, or take a jackhammer directly to the tranny to speed up the impending doom that would otherwise happen
__________________

Der schnellste mann im langsamsten auto

Der schnellste mann im langsamsten auto
where would i get the g60 wiring harness
__________________
http://profile.my
space.com/index.cfm?fuseaction=user.viewprofile&friendid=102 514185
https://www.tamparacing.com/classifi...3/limit/recent
for sale tsw 17s
http://profile.my
space.com/index.cfm?fuseaction=user.viewprofile&friendid=102 514185https://www.tamparacing.com/classifi...3/limit/recent
for sale tsw 17s
i found this for you. I would post on vwvortex that your looking for one.
VWvortex Forums: FS: Various G60 and VR6 Corrado Wiring Harnesses
VWvortex Forums: FS: Various G60 and VR6 Corrado Wiring Harnesses
__________________
I love turtles
I love turtles


