Im new to this forum and i need your guys help. I have a 97 vr6 turbo. I recenty was misfiring on my boost so i replaced the coil and it cleared up. now my car is sputtering and blowing out black smoke. I have a feeling it might be running to rich, but your suggestions would be a great help. heres a list of the engine mods to helpout.

Kinetic Stg1 Kit (upgraded to stg 2 pretty much)
C2 stg 1 fueling 36lb injectors, and chip
Walbro inline pump
Custom FMIC 28x7x2.5 with piping
Forge motorsports connectors
hallman mbc
Forge 007
42nd draft 2.5 testpipe
42nd draft indash boost guage
custom 2.5' with magnaflow all the way from turboback

Also Ive never taken my car to a machanic besides lokey for a 100xxxxx mile tune up for chains and sh@#. Are their any machanics that you would recommend just incase i cant figure out what the f@*# is wrong. Thanks for all your help.

Do you guys still meet on tues. nights

 

Check for boost leaks, and have you changed any part of the set-up recently?

You may want to put it on a dyno and see where your a/f's are.

 

man before you go to far replace the 2 pin blue coolant temp sensor in the thermostat housing, i just got done chasing my tail on my vrt, do that first then see how it does trust me on this one !!!!.
and do you have arp head studs and or a headspacer.

 

fake...this guy clearly doesn't own this car.

 

your fake, why dont you try to put your car in reverse.

 

I'm working on that... I'll give you some rep for finally getting on TR

 

Am i correct on this. If the coolant temp sensor goes will it give the car more fuel then its necessary. thanks for the advice hmmracing

 

Ill give you rep for being a faggot

 

yeah i would do that first, it controls fuel big time, mine was dumping fuel at wot and at idle,
do you have headstuds, what about a 4" maf,

 

a spacer and a 4" maf.