95dc2teg's Daily Boosted Teggy Down the Quarter Mile!
Thread Starter
Registered User
Joined: Oct 2006
Posts: 5,087
Likes: 0
95dc2teg's Daily Boosted Teggy Down the Quarter Mile!
I'm sure some of you have seen my car in the for sale section here on TR. if not here's the thread:
https://www.tamparacing.com/forums/c...not-again.html
This is the first time i have taken the car to the track and was running some worn down 225/50/15 MT street radials. The best run of the night (out of 4) was a 12.6 at 109mph with a 1.9 60' which isn't to shabby with the amount of power being made =). Unfortunately I did not get a video of this pass, but I do have the time slip
.
The first video is a 13.0 with a 2.0 60'. you can see how i roll off the line too much before hitting it. And the second vid is an in car vid and I ran a 12.8 at 108mph with a 200lb passenger.
Here is a pic of the car in 'track mode'
out of car track vid:
In car video:
https://www.tamparacing.com/forums/c...not-again.html
This is the first time i have taken the car to the track and was running some worn down 225/50/15 MT street radials. The best run of the night (out of 4) was a 12.6 at 109mph with a 1.9 60' which isn't to shabby with the amount of power being made =). Unfortunately I did not get a video of this pass, but I do have the time slip
. The first video is a 13.0 with a 2.0 60'. you can see how i roll off the line too much before hitting it. And the second vid is an in car vid and I ran a 12.8 at 108mph with a 200lb passenger.
Here is a pic of the car in 'track mode'
out of car track vid:
In car video:
__________________
#32!!
**If you are apart of the DC Crew and would like a DC crew Sticker shared_pm me!!**
#32!!
**If you are apart of the DC Crew and would like a DC crew Sticker shared_pm me!!**
Last edited by 95dc2teg; Jul 2, 2010 at 05:57 PM.
Cold Ass Honky
Joined: Aug 2007
Posts: 5,067
Likes: 0
Lookin good man
NICE!
90% grind 10% sleep
Joined: Nov 2002
Posts: 6,963
Likes: 0
Very good all around car. Someone should deffinately buy this.
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
35.5 psi, stock sleeves
Joined: Jan 2005
Posts: 1,834
Likes: 0
shifting at 8200?
__________________
PUREBRED PERFORMANCE
Fabrication & Tuning Services
813-451-7547 or 813-712-0202
Www.PPETUNED.com <~~ WEBSITE
Curious on honda/acura Ecu Chipping and dyno tuning? Call or visit the website above. Hondata/Neptune/Ectune/Crome Pro. Tuning available for most other systems and platforms as well. DYNOJET
PUREBRED PERFORMANCE
Fabrication & Tuning Services
813-451-7547 or 813-712-0202
Www.PPETUNED.com <~~ WEBSITE
Curious on honda/acura Ecu Chipping and dyno tuning? Call or visit the website above. Hondata/Neptune/Ectune/Crome Pro. Tuning available for most other systems and platforms as well. DYNOJET
Thread Starter
Registered User
Joined: Oct 2006
Posts: 5,087
Likes: 0
i try and shift at 8k, but it might go to 8100 or 8200 every now and again. i believe what u are seeing is the tach jumping a bit in between shifts due to ICM in the distributor, its not bad, just a little jumpy
__________________
#32!!
**If you are apart of the DC Crew and would like a DC crew Sticker shared_pm me!!**
#32!!
**If you are apart of the DC Crew and would like a DC crew Sticker shared_pm me!!**
Pops
Joined: Oct 2008
Posts: 2,095
Likes: 0
Great job on the car Anthony!
__________________
Jdm b18c R LSD CRX si
TR "Old Skool EF" Member #96
JoKie TuNinG
RANGCRX BUILT TYPE R
StricKlyMT
727-510-6301
Jdm b18c R LSD CRX si
TR "Old Skool EF" Member #96
JoKie TuNinG
RANGCRX BUILT TYPE R
StricKlyMT
727-510-6301
