The Video Post Check here for the latest videos!

JDM H22A Prelude vs Cam'd Sentra Spec V

Thread Tools
 
Old Apr 17, 2006 | 06:38 PM
  #1 (permalink)  
2.2L's Avatar
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 75
Likes: 0
Default JDM H22A Prelude vs Cam'd Sentra Spec V

kinda sucked that the only clean run we got was the roll race, lol. Oh well. Here is the story:I had told charles on preludepower that i was in town and that i wanted to go again. He replies back to me and we get things setup. We had to move quick cuz time was short since he had to go to work or something.

Anyway, we go out to **** road and do our first race.

From a roll at about 40mph.

3 honks....(o)(o)...(o)(o)....(o)(o)....2nd gear ends real quick, we both shift to 3rd. We are dead even at this point and just start to slowly pull as i go through 3rd gear. We shut down soon after since there is no point in going any faster.

I cant even remember how many stop races we did. I think 3, lol. They all had relatively the same outcomes.

Before i had left for tally, i thought i had raised my two step from 4k to 5k. But i didnt install the plugins that allows me to change it so that kinda sucked and played a huge factor with me getting off the line with these big ass tires.

NOTE:
I dont remember which races happened first so STFU!

Stop races 1,2, or 3:
3 honks....2-step at 4k...(o)(o)...(o)(o)....(o)(o)....Charles tires blow a little smoke as he jumps me off the line by 1/2 car. I shift into 2nd and start to reel him in. Right before i shift into 3rd I hear charles hit fuel cut and i take the lead :whip wned

3 honks....2-step at 4k...(o)(o)...(o)(o)....(o)(o)...once again charles gets the jump on me as i bog (damn these wide tires ), then i hit MAD VTECH and get door to door with him after i shift into 2nd. 3rd gear comes around and i start to slowly pull away....MIL shift light comes on at 7500 and i bang 4th gear and continue to slowly pull.

3 honks....2-step at 4k...(o)(o)...(o)(o)....(o)(o)...at this launch, i dunno if charles was just slow off the line or what, but it was pretty even off the launch. Shift light comes on at 7500 and i snag 2nd gear (nothing but traction on this shift, cant even bark the tires) that shift felt very powerful and i took the lead shortly before shifting into 3rd and the rest is history.

All in all, i need to raise my two step and actually tune my car. No excuses for me but my timing maps are VERY conservative and i havent tuned my low cam fuel whatsoever. Charles needs to get his shit up to eagle status and let me get my ITB's on and tune and i think it would be a very good race.

VIDEO:
http://turbov6camaro.com/WickedlyTweaked/

"Blake and Charles"

mods on lude:
* Custom CAI (soon to be Custom Hayabusa Individual Throttle Bodies)
* Custom RMF 4-1 Header
* 2.5" Magnaflow High Flow Cat
* H23 Manual Tensioner Conversion
* AEM Fuel Rail
* B&M Fuel Pressure regulator
* B&M Fuel Pressure Gauge
* Custom Goodridge Stainless Steel Fuel line
* Energy Suspension Motor Mount Inserts
* NGK Plugs and NGK Plug Wires
* Dynamax semi-ceramic clutch
* P28 Ecu
* Crome Engine Management
* Boomslang OBD2A-OBD1 Conversion Harness
* JAZ Motorsports Oil Catch Can

Suspension, wheels & tires:

* Tein HA Coilovers w/ Pillowball Mounts
* SPC Front Camber Kit
* BFGoodrich KWD2 225/45/16

mods on Spec V:
Nismo STS/CAI/Header
MR midpipe
GReddy EvoII
ES MMi
Grounded Knock Sensor
TBBP
Bored TB
Koni Yellows
Pro-kits
17'' RSL Concept Pro
225/45 BFG KDW2
SAFCII
JWT BSr/Cams/Valve Springs
Port & Polished Head
Port matched LIM&Header
__________________
XXX Motorsports - In House DynoJet
850-457-DYNO
BBmoto Built/Tuned - Where honesty meets quality
Authorized Neptune Dealer/Tuner
Authorized eCtune Tuner

Honda OBD1 CHIPPING SERVICES

8.64 @ 81.22mph
All Motor H23vtec Prelude (stock head)
Reply
Old Apr 17, 2006 | 08:26 PM
  #2 (permalink)  
Drivermod03's Avatar
Registered User
 
Joined: Nov 2003
Posts: 7,161
Likes: 0
Default

...Good multiple kills..That guy was the suck at driving
Reply
Old Apr 17, 2006 | 08:45 PM
  #3 (permalink)  
I'm Slow's Avatar
I'm Slow
 
Joined: Aug 2003
Posts: 10,608
Likes: 0
Default

nice vid TT&L
__________________



550/550
Reply
Old Apr 18, 2006 | 09:06 AM
  #4 (permalink)  
Green_Lantern's Avatar
Green Lantern Corps
 
Joined: Feb 2005
Posts: 3,066
Likes: 0
Default

Awesome vid. Good way to represent the 5th gen!
__________________


If you're not cracking oil pans your not low
Reply
Old Apr 18, 2006 | 09:10 AM
  #5 (permalink)  
2.2L's Avatar
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 75
Likes: 0
Default

thanks
__________________
XXX Motorsports - In House DynoJet
850-457-DYNO
BBmoto Built/Tuned - Where honesty meets quality
Authorized Neptune Dealer/Tuner
Authorized eCtune Tuner

Honda OBD1 CHIPPING SERVICES

8.64 @ 81.22mph
All Motor H23vtec Prelude (stock head)
Reply




All times are GMT -8. The time now is 11:02 PM.