CubanPrince1 vs InsaneCivicSedan
RIGHT CLICK SAVE TARGET AS ALPHA'S VIDEO FROM THE SER
RIGHT CLICK SAVE TARGET AS MADEX'S VIDEO FROM THE CIVIC
It will probably take InsaneCivicSedan/Chris a little while to reply as he doesn't have internet access at home right now.
More videos to come.
RIGHT CLICK SAVE TARGET AS MADEX'S VIDEO FROM THE CIVIC
It will probably take InsaneCivicSedan/Chris a little while to reply as he doesn't have internet access at home right now.
More videos to come.
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
Last edited by Alpha; Jun 28, 2005 at 08:39 PM.
good videos and great race. The civic is fast chris.....congrats, u built a good engine...
. If u listen closely u can actually hear the tires roasting in 3rd gear when i get on it lol....
Norlandt
. If u listen closely u can actually hear the tires roasting in 3rd gear when i get on it lol....Norlandt
__________________

http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....

http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....
good runs bro, and again, congrats... Youve waited a long time and been thru alot of shit... Glad to see the car finally running well... You deserve it!!!

__________________

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
Last edited by InsaneCivicSedan; Jun 28, 2005 at 07:25 PM.
Damn, Im not givin you the hit anymore... The first and third run make it look like I got waxed 
(Just had to throw that in there... I made the first post without seeing the vid...
)

(Just had to throw that in there... I made the first post without seeing the vid...
)
__________________

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
True but it looks like Norlandt got waxed when he ran your race due to him ... Eh fsck it. Who cares
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
Well, in the second video we did chris' roll and it wasnt that bad but it spinned badly when boost hit which caused the car to bog for a second but got right back in......i was catching up but we were already going pretty fast. You only gave me the hit on the last one though. Not on the first and third.
__________________

http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....

http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....
I gave you the hit on the first, and I gave you about a car and the hit on the third... All 3 runs were from 45... X can confirm all of this as he was in the car, and watching the speedo on all the runs... Im not trying to take anything away from your car tho Norlandt, that bitch rides out.... And even though I get out on you down low, you do start coming back up top...
__________________

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
No dont get me wrong, good as runs and if u gave me the hit on the first one then i didnt know this. Judging from the video it looks like we both get on it at about the same time....Either way, good runs....we should do it again sometime......soon.......
*Edit: just watched the video again......i obviosuly went first......weird, i started off at 3500 rpms and hit full boost at 4500 and it was a good race but in the second run where u ripped me a new one i started off at almost 4k rpms and u well.......ripped me a new one lol. I wish u would've kept going to see what would've happened.......
...... Good runs, now gimme my rematch bisshhhhh...
.
*Edit: just watched the video again......i obviosuly went first......weird, i started off at 3500 rpms and hit full boost at 4500 and it was a good race but in the second run where u ripped me a new one i started off at almost 4k rpms and u well.......ripped me a new one lol. I wish u would've kept going to see what would've happened.......
__________________

http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....

http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....
Last edited by cubanprince1; Jun 28, 2005 at 07:58 PM.
As soon as you get your tires we will do it again
__________________

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
Originally Posted by InsaneCivicSedan
As soon as you get your tires we will do it again 
__________________

http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....

http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....


