supra powered truck
my truck is a 1988 toyota 2wd standard cab short bed. i stuck a 5m-ge motor in it out of an older supra. have a twin entry ct-26 turbo, 3'' downpipe, 430cc supra injectors, supra BOV, Behr 27'' by 17'' air to air IC, 2'' to 2.5'' IC piping, waste gate running a 2'' external dump, 26'' by 8'' slicks (not yet installed), welded locker, elec. fan,manual tranny motor remains internally stock for now, cuz im building 3.0 bottom end to go along with my ported head and new stand alone fuel/ign. system (megasquirt) right now im working on my oil and coolant lines for the turbo. Oh by the way.....my homedepot boost controller can be tweaked in cab......."JUST IN CASE THERES A LIL BLACK SYCLONE NEXT TO ME''
Last edited by supratruck; 09-11-2003 at 03:23 PM.
Originally posted by supratruck
my homedepot boost controller can be tweaked in cab......."JUST IN CASE THERES A LIL BLACK SYCLONE NEXT TO ME''
my homedepot boost controller can be tweaked in cab......."JUST IN CASE THERES A LIL BLACK SYCLONE NEXT TO ME''
Its seems as though your calling me out....
Tell ya what. The Sy is down for the moment while it recieves a nasty little trans rebuild.
When its back rolling after some chip calibration and wideband tuning, i'll be glad to let ya know..... no "take it to the track" bullsh!t, i dont support TR's pleads of anti streetracing like so many others on this board.
good enough?
dont forget now.. im on your side, anyone with a turbo truck that can run numbers earns my respect.
__________________
adam
91 syclone #237
92 typhoon #1181
GMC Typhoon 1011 - sold
GMC Typhoon 0366 - sold
F.A.S.T.
SyTy.net - Administrator
adam
91 syclone #237
92 typhoon #1181
GMC Typhoon 1011 - sold
GMC Typhoon 0366 - sold
F.A.S.T.
SyTy.net - Administrator
Last edited by MYSY 8U; 09-11-2003 at 08:03 PM.
proportioning valve? i made mine out of 1/4'' npt shyt and a spring and 1/4'' ball bearing....kinda shade tree, but itll handle around 15psi.......
but i would like to see the sy when its back on the road. always liked those things. but couldnt find one for a good price back when i was truck hunting.....
but i would like to see the sy when its back on the road. always liked those things. but couldnt find one for a good price back when i was truck hunting.....
one of my sy buddies used a similar setup with the ball bearing...never could get it to hold solid boost.
this is the valve i used to have:
sytys are easy to find... FL has the largest number of trucks in the nation...just need to know where to look and be fast about buying.
this is the valve i used to have:
sytys are easy to find... FL has the largest number of trucks in the nation...just need to know where to look and be fast about buying.
__________________
adam
91 syclone #237
92 typhoon #1181
GMC Typhoon 1011 - sold
GMC Typhoon 0366 - sold
F.A.S.T.
SyTy.net - Administrator
adam
91 syclone #237
92 typhoon #1181
GMC Typhoon 1011 - sold
GMC Typhoon 0366 - sold
F.A.S.T.
SyTy.net - Administrator
2.3 turbo in a 91 ranger undergoing final touches as i type.
__________________
91 ranger, 88 tc 2.3 turbo, stroked, bored, 5.5" crower connecting rods, wiseco 8.0:1 dished pistons, total seal .030 rings, fully ported iron big valve head, racer walsh turbo roller cam, bobs log, holset wh1c, fmic, full 3" exhaust. not really a whole lot left to do.
93 explorer 4x4
91 ranger, 88 tc 2.3 turbo, stroked, bored, 5.5" crower connecting rods, wiseco 8.0:1 dished pistons, total seal .030 rings, fully ported iron big valve head, racer walsh turbo roller cam, bobs log, holset wh1c, fmic, full 3" exhaust. not really a whole lot left to do.
93 explorer 4x4
Turbo Tacoma in the making, just need a little more funding and it'll be in. Hopefully shortly after Christmas.
__________________
Error - CustomTacos.com Zaino Guru
Error - CustomTacos.com Zaino Guru
let us know what it does...
__________________
adam
91 syclone #237
92 typhoon #1181
GMC Typhoon 1011 - sold
GMC Typhoon 0366 - sold
F.A.S.T.
SyTy.net - Administrator
adam
91 syclone #237
92 typhoon #1181
GMC Typhoon 1011 - sold
GMC Typhoon 0366 - sold
F.A.S.T.
SyTy.net - Administrator