Custom Alignment???
Thread Starter
Registered User
Joined: Jan 2009
Posts: 8
Likes: 0
Custom Alignment???
I am finishing up a suspension rebuild on my 91 Miata, and am looking for a shop that will align my car, with me sitting in the drivers seat.
Hear is EXACTLY what I am after ±0.0:
Rear:
Toe: 1/32 inch IN per side
Camber: -1.75 degrees
Front:
Camber: -1.2 degrees
Caster: 5.0 degrees
Toe: 1/32 inch IN per side
My car is not lowered at all. All new poly bushings installed with zerks fittings. On 14x6 wheels with 195/60/14 tires.
Hear is EXACTLY what I am after ±0.0:
Rear:
Toe: 1/32 inch IN per side
Camber: -1.75 degrees
Front:
Camber: -1.2 degrees
Caster: 5.0 degrees
Toe: 1/32 inch IN per side
My car is not lowered at all. All new poly bushings installed with zerks fittings. On 14x6 wheels with 195/60/14 tires.
__________________
