ok so i have three supras...2 with abs (both have r154 trannies) and one with no abs(automatic) now im swapping my 7mgte and r154 into my auto with no abs...what do i do about the clutch hardline that runs from the slave cylinder into the abs pump and then to the tranny? can i go directly to the trans from the slave?

 

OMG

The clutch line goes to the abs system?

No doubt thread of the year.

 

what drugs are you on? seriously?

 

oh come on....don't be mean. the clutch hard line is a separate line all together and does NOT tie into the brake system at all

-t3d

 

ok def. feel stupid now i just went out there and pull the little plastic thing aside and saw that it went down instead of towards the abs pump
<---jackass

 

it happens man. i installed my cam seals BACKWARDS some how a while ago. haha

-t3d

 

hhhhmmmm. i think hes on to somthing. abs clutch for those learning to drive stick!you dont feel the car pulse on a hard brake slam,so if your learning to drive stick and dump the clutch it might feel smooth. could be the next big money idea!

 

if you dont know how to drive a clutch buy a bleedback valve. it restricts the flow from the slave back to the master cylinder to keep you from being to hard on the drivetrain. forget what company made it now. but i have seen them. has basically 2 orfices, 1 is a 1 way valve so the clutch can be disengaged instantly. but when you let off the valve closes and forces the fluid through the tiny orfice.