i will be using the sw20 agx's and i wanted to know how much to cut off of the case so i don't need a spacer. i was going with 50mm but i wanted to be sure before i screww up a good set of cases.

Rudo

 

yo wats good with the yota i just bought another ae86 bro clean for 600.00

 

i'm taking it to real speed up in Clearwater to do some rearend and some suspension work.

 

you should get in touch with T3 bro. this cars gonne be 3tc/efi/boost right?
CANT WAIT! that bitch is gonna be bad

 

I would suggest Club4AG - Tuned Toyota Automobile Enthusiasts or Hachiroku.net


I would search those threads about shortening the case. They do have exact measurements, pics, and DIY's as well. have fun!

 

3TCPower what suspension work are you having done? but to stay on point where did you get your agx's for and how much?

 

DouglasProbe
i'm putting a ford 8.8 under her. i also got a coilover conversion kit from Qa1 and i will be using it for the rear. i will be keeping the 4link setup because it works how it is right now. here is the part# 765015 sw20 kyb agx adjustables...you can pretty much find them anywhere that sells shocks.

dfigte31yota
correct! 3tc....efi....boost.....35+ to be exact. there have been tons of haters in this forum in the past and i am building this car with them in mind. i had my run in's with supra owners and they talk a lot of shit. don't get me wrong i love those cars but some of the bitches are cocky as hell.....back to the topic. i will post the car up once it is done.

i found out what to do as far as cutting the strut case, i will go with 40mm and then use a 20mm spacer.

 

i used aw11 rear struts in the front of my 84 mkii. i used washers to space it up and cut the spring seat off and welded a new one on for the coilover sleeve. works great actually.