sounds good to me let me know where and when to bring you the cash I live in spring hill but go to clearwater and tampa almost every day my # 352-666-4575 cell# 813-404-0463 my name is barry. and both of my motors have that dist with the shield and inline cap.

 

ill call you on monday
and go find an aw11 ecu

 

OMG I LOVE the fx! I'm glad to see someone on here with one. Is it an fx16 gts?

Anyhow, aw11 cap points the wires upwards. the ones that point out are ae86, the ones that point away to the sides are fx/ae92.

You could get a stock tubular header from a 20v or even better yet slap a turbo on, run 6-7 psi and go go go! You can source 4age 235cc injectors from a 91-92 geo prizm gsi or a 90-91 corolla gts. They are high impedence so you'd have to bypass your injector resistors. It's all really easy. if you wanna stay the na route get some cheap cams from pdm, clean up all the castings on the head and run rally agressive timing. 4age are really easy to squeeze some extra power out of. It all depends on which way you'd wanna do it.

And btw 4age benefit greatly from a nice exhaust.

Good luck.

 

both motors have the aw11 distributors Ifound some regrind cams the guy says 255 duration and 7.67 lift the duration makes sense to me but 7.67 lift ? is this good. I am an experianced engine builder have built many small block ford motors and am very good at porting heads I have a couple cars that run but I have always wanted this car since it was new when my sister in law brought it home in 87 and smoked the rabbit gti that me and my brother had been working on and we thought it ran. how do i tell if it is gts it doesent say it anywhere and I even have the original window sticker . anyway I really dont want a race car I already have one of those just some bolt ons and be dependable all of the suggestions I have gotten from you guys soun great and dooable it also has real clean interior and some american racing rims that look like the 80s corvette rims with new tires so I am gonna spend most of my money on parts for swap and bolt ons I already bought a gasket kit and water pump I still need a clutch and timing belt and tensioner pulley 1 is rusted and the other is the original I dont want to do it twice so I must collect parts I would post pics but I dont know how.

 

Gts has 4 wheel disc. some had sideskirt, some didn't. Without 4 wheel disc its a regular fx.

I think I have an lsd tranny that will fit if you're interested.

 

it has 4 wheel disc. I have 2 trannys both wont go into 5th and I dont know if they limited slip probably not I might be intristed in trans. someone told me there is a peice in the shifting forks or mechanism that needs to be replaced in the side cover. what do you want for the trans ? oh I dont think it has skirts. thanks. also I have driven by your shop a few times and see some nice cars there.