Grrr... need some advice.
okay! after putting my front mount on today which pretty much took ALL day. i get in my car and start it..... BOOM! instant CEL!
So im like DAMNIT! i call jeff and he heads right over! "thanks jeff"
Okay so he looks up the 3 freakin codes...
P2005
P2006
P2011
Something about TGVS staying closed!
Anyone know anything about this, how to fix? will it hurt to drive the car?...
Jeff is going to look at it some more tomorrow!!
So im like DAMNIT! i call jeff and he heads right over! "thanks jeff"
Okay so he looks up the 3 freakin codes...
P2005
P2006
P2011
Something about TGVS staying closed!
Anyone know anything about this, how to fix? will it hurt to drive the car?...
Jeff is going to look at it some more tomorrow!!
hmm thats weird i wouldnt drive on it because thats blocking air flow and will make you run rich but try taking the sensors off the tgvs and put them back on and make sure no wires got cut
on the tgvs there one on each side a total of four just take them off and and make sure theyre on and the lines are all good
the car feels weird! sometimes it will get up and go! then on some runs it will bog down! do you think one of the TGV banks is closed? car smell like its running rich also! i have to work tomorrow so im gonna go really slow! try not to boost at all...
maybe you pinched one of the wires on the TGV sensor?
it does not sound like anything relayed to the fmic.
it does not sound like anything relayed to the fmic.
__________________

6 letters spell it, 5 lifters be ticking on it, 4 cams spinning on it, 3in cutout on it, 2 heads flowing on it, 1 turbo creeping on it, SUBARU.
Osecuroms.org Opensource Stage II 2006 wrx 281 downloads and counting

Osecuroms.org Opensource Stage II 2006 wrx 281 downloads and counting
Pm me about Subaru Tuning
it's exactlly what happened to my car. one of your tgv sensors is not plugged in. or possibly more than one. check all tgv motors and make sure they are plugged in. I forgot to connect one of mine when I put it all back together and it did the same shit.....it would get up and go for a second, then run like it was on 1 cylinder. hope this helps.
his brother broke one of the motors for the tgv and i still have all 4 of mine so hes going to come by later and pit one up




