Subaru Tech All We'll Drive

Clutch Help

Thread Tools
 
Old Apr 15, 2007 | 07:54 PM
  #1 (permalink)  
Syncro4ws's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 94
Likes: 0
Default Clutch Help

My clucth just started slipping the other night and need some info.

Look for somewhere to get the work done but dosnt charge what Mastro wants. Also what cluctchs are good. this stock one seemed to wear out awfull fast.

thanks
Reply
Old Apr 15, 2007 | 08:06 PM
  #2 (permalink)  
Dan W.'s Avatar
__________
 
Joined: Aug 2006
Posts: 2,349
Likes: 0
Default

Depends on what you are going to be doing to your car. With the WRX tranny i would either go with the Exedy Stg 1 Organic, or the ACT Street disk though.
Reply
Old Apr 16, 2007 | 12:02 AM
  #3 (permalink)  
blacksti's Avatar
DudeMan
 
Joined: Sep 2006
Posts: 5,508
Likes: 0
Default

yea if you have a wrx with stock tranny then you dont want a grippy clutch because it will kill your tranny with launches etc
__________________
2jz mustang build
https://www.tamparacing.com/forums/g...l-project.html




Reply
Old Apr 16, 2007 | 07:26 AM
  #4 (permalink)  
I'm Slow's Avatar
I'm Slow
 
Joined: Aug 2003
Posts: 10,608
Likes: 0
Default

Originally Posted by Syncro4ws
My clucth just started slipping the other night and need some info.

Look for somewhere to get the work done but dosnt charge what Mastro wants. Also what cluctchs are good. this stock one seemed to wear out awfull fast.

thanks
What mods do you have? I putting down close to double the stock power and still on my stock clutch, 33k miles. I am pretty confident that the clutch will be shot shortly after the meth tune though
__________________



550/550
Reply
Old Apr 16, 2007 | 08:34 AM
  #5 (permalink)  
im2wrxy's Avatar
Registered User
 
Joined: Oct 2005
Posts: 1,153
Likes: 0
Default

I went with the Exedy OEM replacement. You can get them on ebay for ~$200 shipped.
Reply
Old Apr 16, 2007 | 05:50 PM
  #6 (permalink)  
ryan_west06's Avatar
Registered User
 
Joined: Jan 2007
Posts: 1,822
Likes: 0
Default

i have a brand new fx100 with flywheel sitting in my room. waiting for my ra gears! HOLLA
Reply
Old Apr 17, 2007 | 04:08 PM
  #7 (permalink)  
Syncro4ws's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 94
Likes: 0
Default

I am at stage 2 right now. I have been pretty tough on the car. I know the clutch being worn out is my own fault. I think i will just get the exedy oem from ebay. Now i just need somewhere do get the install done.

Also what is the concensis on lightend flywheels. I saw on an old post that fatangel sugested one with this clutch. if going with the flywheel. now is the time.
Reply




All times are GMT -8. The time now is 04:40 PM.